【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

AUTOMATION
CONTROLS

Search
Discontinued
Products



LC4H-W Electronic Counters(DIN 48) (Discontinued Products)

Rating/ Performance

Item Ralay output type Transistor output type
AC type DC type AC type DC type
Rating Rated operating voltage 100 to 240 V AC 24 V AC 12 to 24 V DC 100 to 240 V AC 24 V AC 12 to 24 V DC
Rated frequency 50/60 Hz common -
50/60 Hz common -
Power consumption Max. 10 V A Max. 3 W Max. 10 V A Max. 3 W
Rated control capacity 3 A, 250 V AC (resistive load) 100 mA, 30 V DC
Input mode Addition (UP)/Subtraction (DOWN)/Direction (DIR)/Individuality (IND)/Phase (PHASE) 5 modes selectable by DIP switch
Counting speed 30 Hz(cps)/5 KHz(cps) (selectable by DIP switch)
Counting input (Input 1, 2) Min. input signal width: 16.7 ms at 30 Hz(cps)/0.1 ms at 5 KHz(cps) ON time: OFF time = 1:1
Reset input method Min. input signal width: 1 ms, 20 ms (selected by DIP switch)
Input signal Contact or Open collector input/Input impedance: 1 kΩ or less, Input residual voltage: 2 V or less, Open impedance: 100 kΩ or less, Max. energized voltage: 40 V DC
Output mode Output 1. HOLD-B, C, D SHOT-A (4 modes)
Output 2. HOLD-A, B, C SHOT-A, B, C, D (8 modes)
(selectable by DIP switch)
One shot output time Approx. 1 s
Indication 7-segment LCD, Counter value (backlight red LED), Setting value (backlight yellow LED)
Digit -99999 to 999999 (-5 digits to 6 digits) (0 to 999999 for setting)
Memory EEP-ROM (Overwriting times: 105ope. or more)
Contact Contact arrangement 1 Form A + 1 Form A 1 Form A + 1 Form A (Open collector)
Contact resistance (Intial value) 100 mΩ (at 1 A 6 V DC) -
Contact material Ag alloy/Au flush -
Life Mechanical(contact) Min. 2.0×107ope. -
Electrical(contact) Min. 1.0×105ope. (At rated control voltage) Min. 1.0×107ope. (At rated control voltage)
Electrical Allowable operating voltage range 85 to 110 % of rated operating voltage
Break down voltage
(Initial value)
Between live and dead metal parts: 2, 000 Vrms for 1 min (pin type)
Between input and output: 2, 000 Vrms for 1 min
Between open contacts: 1, 000 Vrms for 1 min
Between live and dead metal parts: 2, 000 Vrms for 1 min
Between input and output: 2, 000 V AC for 1 min
Insulation resistance (At 500 V DC) (Initial value) Between live and dead metal parts: Min. 100 MΩ (pin type)
Between input and output: Min. 100 MΩ
Between open contact: Min. 100 MΩ
Between live and dead metal parts: Min. 100 MΩ (pin type)
Between input and output: Min. 100 MΩ
Temperature rise Max. 65°C
(under the flow of nominal operating current at nominal voltage)
-
Mechanical Vibration resistance Functional 10 to 55 Hz (1 cycle/min), single amplitude: 0.35 mm .014 inch (10 min on 3 axes)
Destructive 10 to 55 Hz (1 cycle/min), single amplitude: 0.75 mm .030 inch (1 h on 3 axes)
Shock resistance Functional Min. 98 m/s2 321.522 ft./s2(4 times on 3 axes)
Destructive Min. 294 m/s2 964.567 ft./s2(5 times on 3 axes)
Operating conditions Ambient temperature -10°C to 55°C/ +14 ° F to +131 ° F
Ambient humidity Max. 85 % RH (non-condensing)
Air pressure 860 to 1, 060 h Pa
Ripple rate -
20 % or less -
20 % or less
Connection 11-pin/screw terminal
Protective construction IP66 (front panel with a rubber gasket)

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)