【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
LH2H Hour Meters (Discontinued Products)
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
June 30, 2023 |
|
|
Dimensions
1.Panel Mounting Type
1.One-touch installation type
Dimensions
General tolerance : ±1.0 ±0.39 |
|
|
Panel installation diagram
|
Note) When installing to a 4.5mm/ .177inch thick panel, remove the rubber spacer first. |
|
When installing the one-touch installation type model, make sure that the installation spring does not pinch the rubber gasket.
To prevent the installation spring from pinching the rubber gasket:
1.Set the rubber gasket on both ends of the installation spring(left and right).
2.Confirm that the installation spring is not pinching the rubber gasket, and then insert and fix the installation spring in place from the rear of the timer unit. |
|
2.Installation frame type
Dimensions
General tolerance : ±1.0 ±0.39 |
|
|
Panel cut-out dimensions
|
The standard panel cut-out is shown below.
Use the mounting frame (ATH3803) and the rubber packing (ATH3804).
(Only installation frame type.) |
|
For connected installation
(sealed installation)
(Only installation frame type.)
|
Notes)
1.Suitable installation panel thickness is 1 to 4.5 mm/ .039 to .177 inch.
2.Waterproofing will be lost when installing repeatedly (sealed installation). |
|
Terminal layout and wiring diagrams
1.Standard type
Non voltage input type |
Voltage input type |
Free voltage input type |
|
|
|
2.Backlight type
Voltage input type |
|
2.PC Board Mounting Type
External dimensions
General tolerance: ±1.0 ±.039 |
|
|
PC board pattern (BOTTOM VIEW)
|
Note: The AXS212811K is recommended as a compatible connection socket. |
|
Terminal layout and wiring diagrams
Return to top
Return to top