AUTOMATION
CONTROLS

Search
Discontinued
Products



LH2H Preset Hour Meters (Discontinued Products)

Rating/ Performance

Item Descriptions
Rating Rated operating voltage 24 V DC
Rated power consumption Max. 1.5 W
Rated control output 100 mA 30 V DC
Time counting direction Addition or Subtraction (selectable by front switch)
Measurement time range 0 to 999999.9h/0 to 3999d23.9h (selectable by slide switch on side)
0 to 999h59m59s/0 to 9999h59.9m (selectable by slide switch on side)
Start input Min. input signal width: Min. 30 ms
Reset input Min. input signal width: Min. 30 ms
Input signal .Non-voltage input using contacts or open-collector connection
.Input impedance; when shorted: Max. 1 kΩ, when open: Min. 100 kΩ
.Residual voltage: Max. 2 V
Operation mode Totalizing ON delay, Signal ON delay, Signal flicker, Pulse ON delay
(selectable by front switch)
Display method 7-segment LCD
(Switch between red and green for backlight, and between lit and flashing for time up.)
Power failure emory EEP-ROM (Overwriting times: 105 operations or more)
Time
accuracy
Operating time fluctuation ±0.01% ±50 ms
in case of power on start
±0.01% ±30 ms
in case of input signal start

Rated operating voltage:
85 to 110%
Ambient temperature:
--10 to +55°C /+14 to +131°F
Voltage error
Temperature error
Setting error
Contact arrangement 1 Form A (Open collector)
Electrical life (contact) 107 operations (at rated control voltage)
Electrical Allowable operating voltage range 85 to 110% of rated operating voltage
Break down voltage
(Initial value)
Between input and output: 1,500 V AC, for 1 min.
Insulation resistance
(Initial value)
Between input and output: 100 MΩ (at 500 V DC)
Mechanical Functional vibration resistance 10 to 55 Hz (1 cycle/min), Single amplitude: 0.15 mm (10 min. on 3 axes)
Destructive vibration resistance 10 to 55 Hz (1 cycle/min), Single amplitude: 0.375 mm (1 hr. on 3 axes)
Functional shock resistance Min. 98 m/s2 (4 times on 3 axes)
Destructive shock resistance Min. 294 m/s2 (5 times on 3 axes)
Operating conditions Operation temperature --10 to 55°C/ +14 to +131°F (without frost or dew)
Storage temperature --25 to +65°C/ 13 to +149°F (without frost or dew)
Ambient humidity 35 to 85% RH (non-condensing)
Protective construction IP66 (front panel with mounting bracket and rubber gasket)
*The factory default preset value is set to 0.1.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)