TH50 Minutes Indicator Hour Meters (Discontinued Products)
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
September 30, 2016 |
|
|
Cautions For Use
SAFETY PRECAUTIONS
To prevent injury and accidents, be sure to observe the following instructions.
Make sure to read the operating instructions and the following precautions for use before installation, operation, maintenance, or inspection. Before using the product, the users must have a thorough understanding of the equipment, safety information, and miscellaneous precautions for its use.
[Warning]
Indicates a possible hazard that will result in death or serious physical injury of the operator in the event of incorrect handling.
[Caution]
Indicates a possible hazard that will result in physical injury of the operator or only property damage in the event of incorrect handling.
Warning
- Take safety measures outside the product so that the whole system maintains its safety level even if the product broke down or an external factor caused any abnormality.
- Do not use the product in any flammable gas atmosphere. Otherwise, this may result in an explosion.
- Do not expose the product to fire. The batteries and/or electronic components may explode.
Caution
- To prevent overheating or smoke, secure sufficient margins in relation to the guaranteed characteristics and performance values of the product.
- Do not try to disassemble or modify the product. Otherwise, this may result in overheating or smoke.
- Do not touch the terminals while the power is on. Otherwise, this may result in an electric shock.
- Setup emergency stop and interlock circuits outside the product.
- Securely connect the cables and connectors. Otherwise, loose connections may result in overheating or smoke.
- Securely solder the joints. Otherwise, insufficient soldering may result in overheating or smoke.
- Do not put foreign substances, such as liquids, combustibles, or metals, into the product. Otherwise, this may result in overheating or smoke.
- Do not perform any work (e.g. connection, removal) while the power is on. Otherwise, this may result in electric shock.
Frequency setting
Frequency is specified for AC motor-driven hour meters. Before installing, be sure to check your local power frequency.
Connections
・TH13, 23, 14, 24, 40, 50, 63, 64
Note : | Make the connection with the accompanying flat connector first and then with the hour meter's terminal (#187). In such case, be sure to cover the connection with the accompanying insulating sleeve. |
・TH70, TH8
Note : | Solder the lead wires in position. |
Reset-type hour meter
Precautions for use
If the number indications are off before use, press reset button and confirm that all zeroes "0" are displayed.
Resetting caution
Exercise due caution as an insufficient amount of pressure on reset button may result in abnormal readings.
Return to top
Return to top