【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Timers / Counters / FA Componets
> Limit Switches
> QL (AZ4) Micro Limit Switch(Discontinued Products)
> Cautions For Use
QL (AZ4) Micro Limit Switch (Discontinued Products)
|
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Cautions For Use
Ambient conditions
- The use of these switches under the following conditions should be avoided.
If the following conditions should become necessary, we recommend consulting us first.- Use where there will be direct contact with organic solvents, strong acids or alkalis, or direct exposure to their vapors.
- Use where inflammable or corrosive gases exist.
- Because these switchies are not of water resistant or immersion-proof construction, their use in water or oil should be avoided.
Also, locations where water or oil can normally impringe upon the switch or where there is an excessive accumulation of dust should be avoided. - In order to maintain the reliability at a high level under practical conditions of use, the actual operating conditions should be checked for the benefit of the quality of the product.
- Do not use the switch in a silicon atmosphere.
Case should be taken where organic silicon rubber, adhesive, sealing material, oil, grease or lead wire generates silicon. - Avoid use in excessively dusty environments where actuator operation would be hindered.
- This is designed to use inside. When used outdoors (in places where there is exposure to direct sunlight or rain such as in multistory car parks) or in environments where ozone is generated, the influence of these environments cause deterioration of the rubber material and damage for the products.
Wiring
- Although QL limit switches have large over-travel (O.T.), excessive O.T. will occur wear and change in its characteristics.
Specifically, where there is a need for long life, it is recommended that the proper O.T. should be used.
When the operating object is in the free condition, force should not be applied directly to the actuator. - Use their own accessories when mounting and wiring QL limit switches so as to maintain their own characterisrics.
|
BY EMAIL
- U.S.A.
- +1-800-344-2112
- Europe
- +49-89-45354-1000
- China
- +86-10-59255988
- Singapore
- +65-6299-9181
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
