【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Timers / Counters / FA Componets > Temperature Controllers > KT2 Temperature Controllers(Discontinued Products) > Rating/ Performance

KT2 Temperature Controllers (Discontinued Products)

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

	September 29, 2023

Discontinued Products
Information

Rating/ Performance

Dimensions

Wiring/ Connection

Cautions For Use

Rating/ Performance

Rating And Specifications

Display				Specifications
Display				KT2
CE marking directive compliance				Low Voltage Directive, EMC Directive, RoHS Directive
Size				48×24mm 1.890×0.945 in
Rating	Supply voltage (Must be specified)			100 - 240V AC
	Supply voltage (Must be specified)			24V AC/DC
	Frequency			50/60Hz
	Rating power consumption			5 VA approx.
	Rated scale	Input type		Input range
		Thermocouple	K	-200 to 1,370℃(-320 to 2500℉)
			K	-199.9 to 400.0℃(-199.9 to 750.0℉)
			J	-200 to 1,000℃(-320 to 1800℉)
			R	0 to 1,760℃(0 to 3200℉)
			S	0 to 1,760℃(0 to 3200℉)
			B	B0 to 1820℃(0 to 3300℉)
			E	-200 to 800℃(-320 to 1500℉)
			T	-199.9 to 400.0℃(-199.9 to 750.0℉)
			N	-200 to 1,300℃(-320 to 2300℉)
			PL-II	0 to 1,390℃(0 to 2500℉)
			C(W/Re5-26)	0 to 2315℃(0 to 4200℉)
		RTD	Pt100	-200 to 850℃(-300 to 1500℉)
			Pt100	-199.9 to 850.0℃(199.9 to 999.9℉)
			JPt100	-200 to 500℃(-300 to 900℉)
			JPt100	-199.9 to 500.0℃(-199.9 to 900.0℉)
		DC Current	4 to 20mA DC	-1,999 to 9,999, -199.9 to 999.9 -19.99 to 99.99, -1.999 to 9.999
		DC Current	0 to 20mA DC
		DC Voltage	0 to 1V DC
			0 to 10V DC
			1 to 5V DC
			0 to 5V DC
				· Scaling and change to the decimal point position is possible for DC current input and DC voltage input. · DC current input is supported with an externally connected 50Ω shunt resistor (sold separately).
Sensor input		Thermocouple		K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) External resistor: Max. 100Ω (max. 40Ω external resistor for B input)
		RTD		Pt100, JPt100 3-conductor system (Allowable input conductor resistance for each conductor: max. 10Ωor less)
		DC current	0 to 20mA DC	Input impedance: 50Ω (Connect 50Ω shunt resistor between input terminals.) Allowable input current: 50 mA or less (When 50Ω shunt resistor is used)
		DC current	4 to 20mA DC
		DC voltage	0 to 1V DC	Input impedance: 1 MΩ or more, Allowable input voltage: 5 V or less, Allowable signal source resistance: 2 kΩ or less
			0 to 5V DC	· 0 to 5 V DC, 1 to 5 V DC, 0 to 10 V DC Input impedance: 100 kΩ or more, 1 to 5 V DC Allowable input voltage: 15 V or less, Allowable signal source resistance: 100 Ω or less
			1 to 5V DC
			0 to 10V DC
Control output		Relay contact	(Must be specified)	1a
		Relay contact		3 A 250 V AC (at resistive load), 1 A 250 V AC (at inductive load cos ø = 0.4), Electrical life: 100,000 times
		Non-contact voltage (Voltage output for SSR drive )		12⁺²₀ V DC, Max. load current: 40mA (with short circuit protection circuit)
		DC current		4 to 20mADC Load resistance: Max. 550Ω
Alarm output 1 (EV1)				Relay contact 1a 3A 250V AC (Resistive load), 1a 1A 250V AC (cosø=0.4) Electrical life: 100,000 times
Alarm output 2 (EV2)				Open collector 0.1A 24V DC
Control method				PID action (with auto-tuning function), PI action, PD action (with manual reset function), P action (with manual reset function), ON / OFF action
Target temperature setting				Primary setting/secondary setting (switched by external terminal)
Program control function				1 pattern, 9-step setting is possible (However, make function selection setting of either control with fixed set point or program control.)
Accuracy		Thermocouple		Within ± (0.2 % + 1 digit) of each input span or within ±2℃ (4℉) whichever is greater However, R or S input; within ±6℃ (12℉) in the range of 0 to 200℃ (32 to 392℉) B input, range of 0 to 300℃ (32 to 572℉): accuracy is not guaranteed K, J, E, T, and N input, less than 0℃ (32℉): within ± (0.4 % ±1 digit) of input span
		RTD		Within ±(0.1 % + 1 digit) of each input span or ±1℃ (2℉) whichever is greater
		DC current and DC voltage		Within ±0.2% ±1 digit of each input span
Sampling period				250ms
Hysteresis				Thermocouple and RTD: 0.1 to 100.0℃ (℉) DC current and DC voltage: 1 to 1,000 (The decimal point place follows the selection)
Proportional band				For sensor input range and DC current,DC voltage 0.0 to 110.0%
Integral time				0 to 1,000 seconds
Derivative time				0 to 300 seconds
Proportional cycle				1 to 120 seconds
Allowable voltage fluctuation				When 100-240 V AC: 85-264 V AC, When 24 V AC/DC: 20-28 V AC/DC
Insulated resistance				500 V DC, Min. 10 MΩ
Breakdown voltage				Between input terminal and power terminal Between output terminal and power terminal 1.5 kV AC for 1 min.
Malfunction vibration				10 to 55 Hz (1 cycle/min.), single amplitude: 0.35 mm 0.014 in (10 min. on 3 axes)
Breakdown vibration				10 to 55 Hz (1 cycle/min.), single amplitude: 0.75 mm 0.030 in (1 hour on 3 axes)
Malfunction shock				X, Y and Z each direction for 5 times 98 m/s²
Breakdown shock				Same as above, but 294 m/s²
Ambient temperature				0 to 50℃ 32 to +122℉
Ambient humidity				35 to 85%RH (No condensation)
Mass				120 g approx.
Waterproof				IP66 (applicable only to the front panel subject to rubber gasket employed)
Display character height				PV: 8.7 mm 0.342 in SV: 8.7 mm 0.342 in (PV / SV switching display)
Option functions		Heating / Cooling control	Relay contact	Relay contact: 1a 3 A 250 V DC (at resistive load)
		Heating / Cooling control	Non-contact voltage	-
		Heater burnout alarm output		-
		Communication function		Please refer below to “Communication Function Overview”.
Accessories		Mounting frame / Mounting bracket		Included with controller
		Terminal cover		Sold separately
		Rubber gasket		Included with controller

Communication Function Overview

Item	Specification
Communication method	Half-duplex
Communication speed	Select 2,400, 4,800, 9,600, or 19,200 bps using key operation.
Synchronization type	Asynchronous
Protocol	Modbus
Coding	ASCII
Error correcting	Parity check and check sum
Error detection	Parity check, check sum
Data structure	Start bit: 1 Data bit: 7 Parity: Even parity Stop bit: 1
Interface	EIA RS-485 compliant
No. of nodes	31
Maximum cable length	1,000 m 3,280.840 ft(cable resistance must be within 50Ω