【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Laser Markers / 2D Code Readers > Laser Markers / 2D Code Readers > 2D Code Reader LP-ABR10(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Type | Standard type | Long-distance type | ||
---|---|---|---|---|
Model No. | LP-ABR11 | LP-ABR12 | ||
CE marking directive compliance | EMC Directive, RoHS Directive | |||
Image sensor | 1/3 inches CMOS monochrome | |||
Effective pixels | 1,280 × 960 (1.2 million pixels approx.) | |||
Internal illumination source | White LED | |||
Reading angle | PITCH: ±35°, SKEW: ±35°, TILT: 360° | |||
Supply voltage | 24 V DC ±10 % | |||
Power consumption | Command (SYNC) standby: 140 mA approx., During reading operation: 400 mA approx. |
|||
Interface | Ethernet | 10Base-T, 100Base-T, 1000Base-T | ||
RS-232C | 1,200 bps to 115.2 kbps | |||
Digital input | Photo-coupler isolation × 1 (Input resistance: 1 kΩ, OFF voltage: 0 to 0.8 V, ON voltage: 6 to 28 V) |
|||
Digital output | Photo-coupler isolation × 4 (Maximum rating: 30 V DC, 50 mA) | |||
Environmental resistance | Protection | IP65(IEC) | ||
Ambient temperature | 0 to +40 ℃ +32 to +104 ℉, Storage: -20 to +65 ℃ -4 to +149 ℉ | |||
Ambient humidity | 35 to 85 % RH (No dew condensation allowed), Storage: 35 to 85 % RH (No dew condensation allowed) |
|||
Vibration resistance | 10 to 55 Hz amplitude 1.5 mm 0.059 in (total width) in X, Y, Z directions for two hours each | |||
Weight | Net weight: 200 g approx. |
Type | Standard type | Long-distance type |
---|---|---|
Model No. | LP-ABR11 | LP-ABR12 |
Supported symbols (2D) | Data Matrix (ECC200), QR Code | |
Minimum resolution | 0.167 mm 0.007 in | |
Read center distance | 100 mm 3.937 in | 200 mm 7.874 in |
View area (horizontal × vertical) | 54 × 40 mm 2.126 × 1.575 in (at read center distance) |
44 × 33 mm 1.732 × 1.299 in (at read center distance) |
Reading distance (typical) | <Data Matrix (ECC200), QR Code> • For cell size of 0.167 mm 0.007 in : 85 to 125 mm 3.346 to 4.921 in • For cell size of 0.25 mm 0.010 in : 70 to 150 mm 2.756 to 5.906 in |
<Data Matrix (ECC200)> • For cell size of 0.167 mm 0.007 in : 185 to 220 mm 7.283 to 8.661in • For cell size of 0.25 mm 0.010 in : 175 to 230 mm 6.89 to 9.055 in <QR Code> • For cell size of 0.167 mm 0.007 in : 190 to 215 mm 7.48 to 8.465 in • For cell size of 0.25 mm 0.010 in : 180 to 225 mm 7.087 to 8.858 in |
* Cell size of 0.25 mm 0.010 in or larger is recommended (horizontal direction) when the 2D code print quality verification function is used.
Standard type LP-ABR11 |
(Unit: mm in)
|
Long-distance type LP-ABR12 |
(Unit: mm in)
|
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)