【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Laser Markers / 2D Code Readers > Laser Markers / 2D Code Readers > FAYb Laser Marker LP-RF > Specifications

FAYb Laser Marker LP-RF

Specifications

Specifications

Model No.		LP-RF200P
Marking laser	Laser type	Yb fiber laser; λ= 1,064 nm 0.0419 mil Class4 laser
	Average oscillator output	20 W
	Average output at processing point (Note 1)	17 W (±5 %) Pulse oscillation (Pulse cycle: 5 μs to 50 μs)
Guide laser / pointer		Red semiconductor laser; λ= 655 nm 0.026 mil; Class 2 laser: Maximum output 1 mW or less
Scanning method		Galvano scanning method
Marking field		90 mm × 90 mm 3.543 in × 3.543 in
Work distance (Note 2)		190 mm 7.480 in
Scan speed (Note 3, 4)		Maximum 12,000 mm/sec. 472.441 in/sec.
Compatible line speed (Note 4)		Maximum 240 m/min. 787.402 ft/min.
Character		English uppercase letters, English lowercase letters, numerals, katakana, hiragana, kanji (JIS level-1 and level-2), symbols, user-registered characters (up to 50), True type Simplified Chinese characters: GB 2312 level-1 and level-2
Bar code		CODE39,CODE93, CODE128 (GS1-128), ITF, NW-7, EAN/UPC/JAN GS1 DataBar Limited, GS1 DataBar Stacked, GS1 DataBar Limited CC-A, GS1 DataBar Stacked CC-A
2D code		QR Code, Micro QR Code, iQR Code, Data Matrix, GS1 Data Matrix, PDF417
Figure data (Note 5)		VEC, DXF, HPGL, BMP, JPEG, AI, EPS
Input / output port		I/O terminal block (40 pins), I/O connector (40 pins)
Interface		EIA-RS-232C, Ethernet, EtherNet/IP (Note 6, 7), PROFINET (Note 6, 7)
Cooling method		Head: Naturally air cooling, Controller: Forced air cooling
Power supply (Note 8)		180-264 V AC (including power voltage fluctuation of ±10 %), 50/60 Hz
Power consumption (Note 9)		370 VA or less (2.1 A or less)
Protection		Head: IP64
Ambient temperature (Note 10, 11)		0 to +40 ℃ +32 to +104℉
Ambient temperature for storage (Note 10)		-10 to +60 ℃ +14 to +140
Ambient humidity (Note 10)		35 to 85 % RH
Net weight	Head	8 kg approx.
Net weight	Controller	37 kg approx.
Applicable regulations and certifications		FDA Regulations, CE Marking [Machinery Directive (Declaration of Incorporation), EMC Directive, RoHS Directive], UKCA Marking [Supply of Machinery (Safety) Regulations (Declaration of Incorporation), EMC Regulations, RoHS Regulations], Chinese Standard GB 7247.1, Korea’s radio regulations (Radio Wave Act KC)
Supplied software		Laser Marker Smart Utility (Laser Marker NAVI Smart, logo data editing software, ExportVec, font maker software)
Laser Marker NAVI smart display language		Japanese, English, Simplified Chinese, Traditional Chinese, German, Korean
OS supported by the supplied software (Note 12, 13)		Windows® 10 Pro (32 bit, 64 bit), Windows® 8.1 Pro (32 bit, 64 bit)

Notes:

1)	This indicates the output power at processing point when maximum power is set. (Factory default)
2)	There may be an individual difference of approximately ±0.5 mm ±0.02 in in the work distance.
3)	The indicated values show the allowable setting range. The setting values that can maintain the marking / processing quality vary depending on the marking condition and target material.
4)	Depending on the setting data, the scan speed may be subject to upper-limit restriction in some cases.
5)	VEC is a figure file format designed exclusively for laser markers. If figure files in the AI or EPS format are used, they must be converted to VEC-format files in advance using the ExportVEC software provided with the product.
6)	Please prepare optional items separately for communication. LP-ANW10: EtherNet/IP, LP-ANW11: PROFINET EtherNet/IP is a registered trademark of ODVA (Open DeviceNet Vender Association, Inc.). PROFINET is a registered trademark of PROFIBUS & PROFINET INTERNATIONAL.
7)	Supported from the production in September 2019.
8)	Frequency is selected and set automatically.
9)	The rush current (typical value) at startup is as follows: 220 V AC (current flowing time of 10 ms or less): 50 A
10)	Common to the controller and head. There must be no dew condensation or icing.
11)	Laser power setting of 46 or higher: 0 to +36 ℃ +32 to +97 ℉, Laser power setting of 1 to 45: 0 to 40 ℃ 32 to 104 ℉
12)	Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.
13)	OS versions of which Microsoft has ended support are excluded.

PRECAUTIONS FOR PROPER USE

・This catalog is a guide to select a suitable product. Be sure to read instruction manual attached to the product prior to its use.

This product is classified as a Class 4 Laser Product in IEC / JIS / FDA^* regulations 21 CFR 1040.10 and 1040.11. Never look at or touch the direct laser beam and its reflection.
The laser used by this product generates infrared light that is invisible to the human eye. Use particular caution when the laser is operating.
The following labels are attached to the LP-RF series. Handle the product according to the instruction given on the warning labels. (Warning labels are not shown in the product photographs in this catalog.)

*	This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH.

Safety standards for laser beam products

A laser beam can harm human being’s eyes, skin, etc., because of its high energy density. IEC has classified laser products according to the degree of hazard and the stipulated safety requirements.
The LP-RF series are classified as Class 4 laser.

Overview of classification by IEC 60825-1

Classification	Description
Class 4	Lasers that are also capable of producing hazardous diffuse reflections. They may cause skin injuries and could also constitute a fire hazard.

Safe use of laser products

For the purpose of preventing user from suffering injuries by laser products, IEC 60825-1 (Safety of laser products).
Kindly check the standards before use.

Recommended use of a dust collector

Depending on the object being marked, harmful gasses or smoke thet have a detrimental effect on the human body or the laser marker may be generating during marking. If your application falls under this description, use a dust collector.