AUTOMATION
CONTROLS

Search
Discontinued
Products



Ultra High-speed Laser Displacement Sensor HL-C1 (Discontinued Products)

Specifications

Sensor heads

Type Diffuse reflective type
Wide range General purpose High precision
Model No. IEC / JIS standards conforming type HL-C135C-BK10 HL-C108B-BK HL-C105B-BK
FDA regulations conforming type HL-C108F-BK HL-C105F-BK
Measurement center distance 350 mm 13.780 in 85 mm 3.346 in 50 mm 1.969 in
Measuring range ±200 mm 7.874 in ±20 mm ±0.787 in ±5 mm ±0.197 in
Resolution (Note 2, 3) 10 μm 0.394 mil 2 μm 0.079 mil 1 μm 0.039 mil
Linearity (Note 4) ±0.1 % F.S.
Temperature characteristics 0.02 % F.S./℃
Laser emission indicator Green LED
(lights up during laser emission or immediately before laser emission)
Measuring range indicator Yellow LED
[blinks within the measuring range and lights up when near the measurement center distance]
Pollution degree 3 (Industrial environment)
Protection IP67 (IEC)(excluding the connector)
Ambient temperature 0 to +45 ℃ +32 to +113 (No dew condensation),
Storage: -20 to +70 ℃ -4 to +158
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx at the light-receiving face
Voltage withstandability 500 V AC for one min. between the exclusive controller power input part and the sensor head enclosure
Insulation resistance 20 MΩ, or more, with 500 V DC megger between the exclusive controller power input part and the sensor head enclosure
Vibration resistance 10 to 55 Hz (period: 1 min.) frequency,
1.5 mm 0.059 in amplitude in X,Y and Z directions for two hours each
Shock resistance 196 m/s2 acceleration (20 G approx.) in
X,Y and Z directions for three times each
Emitting element Red semiconductor laser, Class 3B (Class III b for FDA regulations) (Max. output: 10 mW, Peak emission wavelength: 658 nm 0.026 mil) Red semiconductor laser, Class 2 (Class II for FDA regulations)
(IEC / JIS standards conforming type: IEC / JIS, FDA regulations conforming type:
FDA / IEC / JIS) (Max. output: 1 mW, Peak emission wavelength: 658 nm 0.026 mil)
Beam diameter (Note 5) 400 x 200 μm 15.748 x 7.874 mil approx. 100 x 140 μm 3.937 x 5.512 mil approx. 70 x 120 μm 2.756 x 4.724 mil approx.
Receiving element Linear image sensor
Enclosure earthing Floating
Material Enclosure: Die-cast aluminum,
Case cover: Die-cast aluminum, Front cover: Glass
Cable Cabtyre cable, 0.5 m 1.640 ft long with connector
Cable extension Extension up to total 30 m 98.425 ft is possible, with optional cable.
Weight Net weight: 300 g approx.
Accessory Laser warning label
JIS(written in Japanese): 1 set (for FDA conforming type only)
IEC(written in English)/GB(written in Chinese): 1 set each

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃ +68 , sampling rate 100 μs, average number of samples: 256 (HL-C135C-BK10: 512), measurement center distance, object measured is made of white ceramic (an aluminum vapor deposition surface reflection mirror was used with specular reflective type). Linearity also depends upon the characteristics of the object being measured.
2) These values were obtained by converting P-P values into a distance. The P-P values indicate the distribution of measured values throughout the measurement center distance.
3) These values were obtained with an average number of samples: 256 (HL-C135C-BK10: 512), when using an object made of our company's standard white ceramic for measurement (an aluminum vapor deposition surface reflection mirror was used with specular reflective types).
4) This value indicates the range of errors for an ideal linear displacement output, when using an object made of our company's standard white ceramic for measurement (an aluminum vapor deposition surface reflection mirror was used with specular reflective types). This value may fluctuate depending on the characteristics of the object measured.
5) These values were defined by using 1/e2 (13.5 %) of the center light intensity. If there is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than the sensing point itself, then the results may be affected.

Type Specular reflective type
General purpose High precision
Model No. IEC / JIS standards
conforming type
HL-C108B HL-C105B
FDA regulations
conforming type
HL-C108F HL-C105F
Measurement center distance 81.4 mm 3.205 in 46 mm 1.811 in
Measuring range ±16 mm ± 0.630 in ±4 mm ±0.157 in
Resolution (Note 2, 3) 2 μm 0.079 mil 1 μm 0.039 mil
Linearity (Note 4) ±0.1 % F.S.
Temperature characteristics 0.02 % F.S./℃
Laser emission indicator Green LED
(lights up during laser emission or immediately before laser emission)
Measuring range indicator Yellow LED
[blinks within the measuring range and lights up when near the measurement center distance]
Pollution degree 3 (Industrial environment)
Protection IP67 (IEC) (excluding the connector)
Ambient temperature 0 to +45 ℃ +32 to +113 (No dew condensation),
Storage: -20 to +70 ℃ -4 to +158
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx at the light-receiving face
Voltage withstandability 500 V AC for one min. between the exclusive controller power input part and the sensor head enclosure
Insulation resistance 20 MΩ, or more, with 500 V DC megger between the exclusive controller power input part and the sensor head enclosure
Vibration resistance 10 to 55 Hz (period: 1 min.) frequency,
1.5 mm 0.059 in amplitude in
X,Y and Z directions for two hours each
Shock resistance 196 m/s2 acceleration (20 G approx.) in
X,Y and Z directions for three times each
Emitting element Red semiconductor laser, Class 2 (Class II for FDA regulations) (IEC / JIS standards conforming type: IEC / JIS,
FDA regulations conforming type: FDA / IEC / JIS) (Max. output: 1 mW, Peak emission wavelength: 658 nm 0.026 mil)
Beam diameter (Note 5) 100 x 140 μm 3.937 x 5.512 mil approx. 70 x 120 μm 2.756 x 4.724 mil approx.
Receiving element Linear image sensor
Enclosure earthing Floating
Material Enclosure: Die-cast aluminum, Case cover: Die-cast aluminum, Front cover: Glass
Cable Cabtyre cable, 0.5 m 1.640 ft long with connector
Cable extension Extension up to total 30 m 98.425 ft is possible, with optional cable.
Weight Net weight: 300 g approx.
Accessory Laser warning label
JIS(written in Japanese): 1 set (for FDA conforming type only)
IEC(written in English)/GB(written in Chinese): 1 set each

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃ +68 , sampling rate 100 μs, average number of samples: 256, measurement center distance, object measured is made of white ceramic (an aluminum vapor deposition surface reflection mirror was used with specular reflective type). Linearity also depends upon the characteristics of the object being measured.
2) These values were obtained by converting P-P values into a distance. The P-P values indicate the distribution of measured values throughout the measurement center distance.
3) These values were obtained with an average number of samples: 256, when using an object made of our company's standard white ceramic for measurement (an aluminum vapor deposition surface reflection mirror was used with specular reflective types).
4) This value indicates the range of errors for an ideal linear displacement output, when using an object made of our company's standard white ceramic for measurement (an aluminum vapor deposition surface reflection mirror was used with specular reflective types). This value may fluctuate depending on the characteristics of the object measured.
5) These values were defined by using 1/e2 (13.5 %) of the center light intensity. If there is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than the sensing point itself, then the results may be affected.

Controllers

Type Photo-MOS relay output
Stardard For HL-C135C-BK10
Model No. HL-C1C-M HL-C1C-M-WL
Connection sensor heads Maximum 2 sensor heads
Supply voltage 24 V DC ± 10 % including ripple 0.5 V (P-P)
Current consumption When 1 sensor is connected: 430 mA approx.,
When 2 sensors are connected: 550 mA approx.
Sampling rate Selectable from 100 μs / 144 μs / 200 μs / 255 μs / 332 μs / 498 μs / 1,000 μs
Temperature characteristics ±0.01 % F.S./℃
Analog output Voltage Output voltage: ±5 V/F.S. [default setting when diffuse reflective mode is selected (Note 2)]
Output range: -10.9 to +10.9 V
Output current: Max. 2 mA, Output impedance: 50 Ω
Current (Note 3) Output current: 4 to 20 mA/F.S. [default setting when diffuse reflective mode is selected (Note 4)]
Output range: 0 to 29.5 mA (maximum of 25 mA at max. load impedance)
Load impedance: 250 Ω or less
Alarm output Photo-MOS relay
・Maximum load current: 50 mA
・Applied voltage: 30 V DC or less (between alarm output and COM)
・ON impedance: 35 Ω or less
・Operation time: Max. 2 ms
  Output operation Opened when the amount of light is excessive or insufficient.
Short-circuit protection Incorporated
Judgment outputs
(O1, O2)
Photo-MOS relay
・Maximum load current: 50 mA
・Applied voltage: 30 V DC or less (between judgment output and COM)
・ON impedance: 35 Ω or less
・Operation time: Max. 2 ms
  Utilization category DC-12 or DC-13
Output operation Opened or closed when the threshold value is reached. Determined based on judgment output mode selection. (The threshold value varies with the hysteresis setting.)
Short-circuit protection Incorporated
Serial input / output RS-232C
Timing input
(Laser emission)
Laser emission stops or continues when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input or there is an open circuit: determined based on input mode selection. -
Remote interlock input - Laser emission stop when open circuit
Zero set ON input Zero set: ON when voltage
(using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input
Zero set OFF input Zero set: OFF when voltage
(using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input
Indicators Laser emission Green LED
(lights up during laser emission from sensor head 1 or sensor head 2, or immediately before laser emission)
BRIGHT Red LED
(lights up upon disabled measurement due to excessive light at sensor head 1 or 2)
DARK Red LED
(lights up upon disabled measurement due to insufficient light at sensor head 1 or 2)
Setting / Data display Compact console (optional)
Calibration
(Note 5)
Shift ±20.0000 mm ±0.787 in ±200.0000 mm ±7.874 in
Span 0.9000 to 1.1000
Average number of samples
(Note 5)
OFF, 2 to 32,768 times (16 steps)
Digital filters (Note 5) High pass: OFF, 10 to 2,000 Hz (9 steps), Low pass: OFF, 10 to 2,000 Hz (9 steps)
Calculation functions (Note 5) L ± KA, L ± KB, L ± K (A ± B)
A, B: Sensor head 1, Sensor head 2 measurement values, L = ±999.9999, K = 0.0001 to 99.9999
Hold functions (Note 5) Selectable from NORMAL / P-P / PEAK / VALLEY
Pollution degree 3 (Industrial environment)
Ambient temperature 0 to +50 ℃ +32 to +122 (No dew condensation),
Storage: -20 to +70 ℃ -4 to +158
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability 500 V AC for one min. between power input part and enclosure
Insulation resistance 20 MΩ, or more, with 500 V DC megger between power input part and enclosure
Vibration resistance 10 to 55 Hz frequency (period: 1 min.) 0.75 mm 0.030 in amplitude in X,Y and Z directions for 30 min. each
Shock resistance 196 m/s2 (20 G approx.) in X, Y and Z directions for 3 times each
Cable length Power line: Less than 10 m 32.808 ft, Signal line: Less than 30 m 98.425 ft
Weight Net weight: 300 g approx.
Accessory - Key: 2 pcs.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃ + 68 , sampling rate 100 μs, average number of samples: 256 (HL-C1C-M-WL: 512), and measurement center distance.
2) If specular reflective mode is selected, then the default setting is ±4 V/F.S.
3) The maximum analog output current will vary with load impedance.
4) If specular reflective mode is selected, then the default setting is 5.6 to 18.4 mA/F.S.
5) These values can be set using the command input from external equipment via the compact console and RS-232C interface.

Compact consoles

Type Standard For HL-C1C-M-WL
Model No. HL-C1DP1-E HL-C1DP1-E-WL
Supply voltage 24 V DC ± 10 % including ripple 0.5 V (P-P)
Current consumption 200 mA or less
Display Display element STN monochrome LCD
Back light White LED
Display range -999.9999 to 999.9999
Language English
Touch panel Operational force 0.5 N or less
Lifetime 1,000,000 times or more (Note 1)
Environment resistance IP65 (at initial status) (Note 2)
Dust prevention and drip-proof at the front panel (waterproof packing is used at the contact surface to board)
Ambient temperature 0 to +50 ℃ +32 to +122 (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to +140
Ambient humidity 20 to 85 %RH, Storage: 10 to 85 %RH
Electrostatic noise resistance 5,000 V or more (panel surface)
Vibration resistance 10 to 55 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y, and Z directions for 10 min. each
Shock resistance 98 m/s2 or more acceleration (10G approx.) in X, Y, and Z directions for four times each
Material Case: PPE, Front protective sheet: Polyester
Weight 230 g approx.
Accessory Connector cable for connecting the controller to the console : 1 pc., Mounting bracket: 1 set

Notes:
1) This value indicates the average lifetime of the unit when used under a normal temperature of 25 ℃ +77 .
2) When reinstalling the console, replace the water proof packing. (Part No: AIGT181, 10 packs included)

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)