【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Measurement Sensors > Measurement Sensors > High Speed, Multi-Point Laser Displacement Sensor HL-D3(Discontinued Products) > Cautions For Use

High Speed, Multi-Point Laser Displacement Sensor HL-D3 (Discontinued Products)

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

	September 30, 2021

Discontinued Products
Information

Specifications

Dimensions

Circuit/ Wiring

Cautions For Use

・ This website has been prepared to aid selection of appropriate products. When using the product, be sure to read the User's Manual.

・	This website has been prepared to aid selection of appropriate products. When using the product, be sure to read the User's Manual.

Never use this product as a sensing device for personnel protection.
This product is intended to detect the objects and does not have the control function to ensure safety such as accident prevention.
When using sensing devices for personnel protection, use products that meet the laws and standards for personnel protection that apply in each region or country, such as OSHA, ANSI and IEC.

Do not operate products using methods other than those described in the instruction manual included with each product. Control or adjustment through procedures other than those specified may cause hazardous laser radiation exposure.
The following labels are attached to the products. Handle each product according to the instruction given on the warning label.
[HL-D301B]
This product is classified as a Class 2 Laser Product in IEC / JIS standards and FDA* regulations. Do not look at the laser beam directly or through optical devices such as a lens.
[HL-D301C]
This product is classified as a Class 3R Laser Product in IEC / JIS standards and FDA* regulations. Never directly look at or touch the laser beam or its reflection.

*	This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration).

Safety standards for laser beam products

A laser beam can harm human being’s eyes, skin, etc., because of its high energy density.
IEC has classified laser products according to the degree of hazard and the stipulated safety requirements.
(Refer to p.1593~ for information about laser beam.)

Safe use of laser products

For the purpose of preventing users from suffering injuries by laser products, IEC 60825-1(Safety of laser products). Please check the standards before use.
(Refer to p.1593~ for information about laser beam.)

Combining new and old versions

Combined operation of new and old versions of sensor heads and controllers are as follows.

		Sensor head
		Ver. 1.10	Ver. 2.00
Controller	Ver. 1.20	Operation	Controller operates as Ver. 1.20 (New features are unavailable.)
Controller	Ver. 2.01	Cannot use (Note) (alarm output, always ON )	Operation

Note)	While the controller may seem to be usable, the controller cannot be used as operations for existing functions are unavailable.
*	Products produced from September 2013 have been upgraded to Ver. 2.

Beam size

Beam size (Unit: mm in)

HL-D301B, HL-D301C

Mutual interference

(Unit: mm in)

When installing two or more sensor heads side by side, mutual interference will not occur if the laser spots from other sensor heads do not fall within the shaded areas of the sensor head in the figure below.

HL-D301B, HL-D301C