【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Measurement Sensors > Measurement Sensors > Laser Type Edge Detection Sensor LD(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
Model No. | LD-600 | LD-601 |
---|---|---|
CE marking directive compliance |
EMC Directive, RoHS Directive | |
Applicable controller | LD-C60 | |
Distance between emitter and receiver |
40 mm 1.575 in (fixed) | |
Sensing width | 15 mm 0.591 in (beam width: 20 mm 0.787 in) | |
Min. sensing object | ø0.5 mm ø0.020 in | |
Resolution | 11 μm 0.433 mil | |
Scan time | 0.6 ms approx. | |
Emitting element | Red semiconductor laser Class 1 (IEC / JIS standards) (Max. output: 0.2 mW, Peak emission wavelength: 670 nm 0.026 mil) |
Red semiconductor laser Class II (FDA regulations) (Max. output: 0.2 mW, Peak emission wavelength: 670 nm 0.026 mil) (IEC / JIS standards: class 1) |
Power indicator | Red LED (lights up when the power is ON) |
- |
Laser emission indicator |
- | Green LED (Lights up during laser emission) |
Ambient temperature |
0 to +40 ℃ +32 to +104 ℉ (No dew condensation) Storage: -10 to +60 ℃ +14 to +140 ℉ |
|
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |
Enclosure earthing | Capacitor earth | |
Material | Emitter enclosure: Die-cast zinc Receiver enclosure: Aluminum, Base: Aluminum Top cover: PPO, Front protection cover: Glass |
|
Cable | 6-core (0.22 mm2 x 4, 0.18 mm2 x 2) cabtyre cable, 1 m 3.281 ft long (with connector on one end) |
|
Weight | Net weight: 420 g approx. | |
Accessories | M4 (length 12 mm 0.472 in) hexagon-socket-head bolt: 2 pcs. |
M4 (length 12 mm 0.472 in) hexagon-socket-head bolt: 2 pcs. Laser attenuator: 1 pc. |
Note : | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉. |
---|
Model No. | LD-C60 | |
---|---|---|
CE marking directive compliance |
EMC Directive, RoHS Directive | |
Applicable sensor heads |
LD-600, LD-601 | |
Sensing modes | Width measurement, edge measurement | |
Measuring accuracy |
Width measurement: ±44 μm ±1.732 mil Edge measurement: ±22 μm ±0.866 mil |
|
Supply voltage | 24 V DC ± 10 % Ripple P-P 10 % or less | |
Current consumption | 250 mA or less (including sensor head) | |
Input (REQ, SHD) |
Signal conditions: Low...0 to 1 V High...5 to 30 V, or open Applied voltage: 30 V DC or less |
|
Output (ACK, D0 to D10) |
NPN open-collector transistor ・Maximum sink current: 20 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1 V or less (at 20 mA sink current) |
|
Output operation | ACK: ON during data output, D0 to D10: pixel binary output | |
Response time | 1.2 ms or less | |
Indicators | Power | Red LED (lights up when the power is ON) |
REQ | Red LED (lights up when the REQ input is Low) | |
ACK | Red LED (lights up when the ACK output is ON) | |
Measurement display | 4 digit LED (letter height 8 mm 0.315 in) | |
Display resolution | 10 μm 0.394 mil | |
Ambient temperature |
0 to +40 ℃ +32 to +104 ℉ (No dew condensation) Storage: -10 to +60 ℃ +14 to +140 ℉ |
|
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |
Material | Enclosure: ABS, Front panel: ABS Display panel: Polycarbonate, Terminal cover: Polycarbonate |
|
Weight | Net weight: 230 g approx. | |
Accessory | Connector: 1 pc. |
Note : | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉. |
---|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)