【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

AUTOMATION
CONTROLS

Search
Discontinued
Products



Micro Laser Displacement Sensor LM10 (Discontinued Products)

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

Last time buy March 31, 2013
 
Specifications

Specifications

Sensor heads [Class 1 type]

Model No. IEC standards
comforming type		 ANR1150 ANR1151 ANR1182 ANR1115
FDA regulations
comforming type		 ANR11501 ANR11511 ANR11821 ANR11151
Measurement center distance 50 mm
1.969 in		 50 mm
1.969 in		 80 mm
3.150 in		 130 mm
5.118 in
Measuring range ±10 mm
±0.394 in		 ±10 mm
±0.394 in		 ±20 mm
±0.787 in		 ±50 mm
±1.969 in
Light source Laser diode (Peak emission wavelength: 650 nm 0.026 mil)
　 Pulse width / Max.output /
Laser class		 15 μs (Duty 50 %) / 0.4 mW (Peak value) / Class 1 (IEC 60825-1), (Class II for FDA regulations conforming type)
Beam spot diameter
(Representative values from a measurement center distance)		 0.6 x 1.1 mm
0.024 x 0.043 in
approx.		 0.09 x 0.05 mm
0.004 x 0.002 in
approx.		 0.7 x 1.2 mm
0.028 x 0.047 in
approx.		 0.7 x 1.4 mm
0.028 x 0.055 in
approx.
Resolution
(2 σ)		 10Hz 5 μm
0.197 mil		 5 μm
0.197 mil		 20 μm
0.787 mil		 100 μm
03.937 mil
100Hz 16 μm
0.630 mil		 16 μm
0.630 mil		 65 μm
2.559 mil		 330 μm
12.992 mil
1kHz 50 μm
1.969 mil		 50 μm
1.969 mil		 200 μm
7.874 mil		 1 mm
00.039 in
Linearity error (Note 2) Within ±0.2 % of F.S.
Protection
(excluding connector)		 IP67 (IEC)
Ambient illuminance
(Incandescent lamp)		 2,500 lx or less
Weight (including cable) Net weight: 300 g approx.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
2) White ceramics is the target of this value.

Class 2 type

Model No. IEC standards
comforming type		 ANR1250 ANR1251 ANR1282 ANR1215 ANR1226
FDA regulations
comforming type		 ANR12501 ANR12511 ANR12821 ANR12151 ANR12261
Measurement center distance 50 mm
1.969 in		 50 mm
1.969 in		 80 mm
3.150 in		 130 mm
5.118 in		 250 mm
9.843 in
Measuring range ±10 mm
±0.394 in		 ±10 mm
±0.394 in		 ±20 mm
±0.787 in		 ±50 mm
±1.969 in		 ±150 mm
±5.906 in
Light source Laser diode (Peak emission wavelength: 650 nm 0.026 mil)
  Pulse width / Max.output /
Laser class		 15 μs (Duty 50 %) / 1.6 mW (Peak value)
/ Class 2 (IEC 60825-1), (Class II for FDA regulations conforming type)
Beam spot diameter
(Representative values from a measurement center distance)		 0.6 x 1.1 mm
0.024 x 0.043 in
approx.		 0.09 x 0.05 mm
0.004 x 0.002 in
approx.		 0.7 x 1.2 mm
0.028 x 0.047 in
approx.		 0.7 x 1.4 mm
0.028 x 0.055 in
approx.		 0.8 x 1.5 mm
0.031 x 0.059 in
approx.
Resolution (2 σ) 10Hz 1 μm
0.039 mil		 1 μm
0.039 mil		 4 μm
0.157 mil		 20 μm
0.787 mil		 150 μm
5.906 mil
100Hz 3.5 μm
0.138 mil		 3.5 μm
0.138 mil		 13 μm
0.512 mil		 65 μm
2.551 mil		 500 μm
19.685 mil
1kHz 10 μm
0.394 mil		 10 μm
0.394 mil		 40 μm
1.575 mil		 200 μm
7.874 mil		 1.5 mm
0.059 in
Linearity error (Note 2) Within ±0.2 % of F.S. Within ±0.4 % of F.S.
Protection
(excluding connector)		 IP67 (IEC)
Ambient illuminance
(Incandescent lamp)		 3,000 lx or less 2,500 lx or less
Weight Net weight: Sensor head (including cable): 240 g approx., Intermediate cable: 130 g approx.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
2) White ceramics is the target of this value.

Controllers

Model No. NPN output ANR5131 ANR5141 ANR5231 ANR5241
PNP output ANR5132 ANR5142 ANR5232 ANR5242
Comparative output type Single comparator Window comparator
Analog output ±5 V/F.S.
(2 mA max.)		 4 to 20 mA/F.S. (250 Ω max.) ±5 V/F.S.
(2 mA max.)		 4 to 20 mA/F.S. (250 Ω max.)
Output impedance 50 Ω - 50 Ω -
Zero-point adjustment Within ±10 % of F.S.
Temperature drift
(Sensor and controller set)		 Within ±(0.03 % of F.S.) /℃ Within ±(0.04 % of F.S.) /℃ Within ±(0.03 % of F.S.) /℃ Within ±(0.04 % of F.S.) /℃
Response frequency (-3 dB)
Response time
(10 to 90 %)		 1 kHz 0.4 ms/ 100 Hz 4 ms/ 10 Hz 40 ms (Switchable)
Comparative output <NPN output type>
NPN open-collector 2 Nos.
(100 mA, 30 V DC or less, residual voltage 1.5 V or less)
<PNP output type>
PNP open collector 2 Nos.
(100mA 30V DC or less, residual voltage 1.5V or less) 		<NPN output type>
NPN open-collector 3 Nos.
(100 mA, 30 V DC or less, residual voltage 1.5 V or less)
<PNP output type>
PNP open collector 3 Nos.
(100mA 30V DC or less, residual voltage 1.5V or less)
　 Hysteresis 0.15 % of F.S. or less
Alarm output <NPN output type> NPN open-collector 1 No. (100 mA, 30 V DC or less, residual voltage 1.5 V or less)
<PNP output type> PNP open-collector 1 No. (100 mA, 30 V DC or less, residual voltage 1.5 V or less)
Intensity monitor output ±5 V
Comparative timing Input No voltage input (when earthing, no comparative output allowed)
MEASUREMENT
SENSORS
MEASUREMENT
Displacement display		 Sensor head: Measuring range display LED (RANGE) Sensor head: Measuring range display LED (RANGE)
Controller: LCD 3 digit display
Gain selection AUTO / LOW (switchable)
Mutual interference
prevention
(Note 2)		 Between 2 sets
Operating voltage range 12 to 24 V DC +10 /-15 % including ripple 0.5 V (P-P)
Current consumption
(Sensor and controller set)		 250 mA or less (at 12 V DC), 125 mA or less (at 24 V DC)
Weight
(including cable)		 Net weight: 180 g approx.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉ .
2) The value of the linearity characteristics, resolution and response time might get worse.

Common

Insulation resistance (Initial) Between external DC input and sensor metal parts (except for connector metal parts) 20 MΩ or more (at 500 V DC megger)
Voltage withstandability (Initial) Between external DC input and sensor metal parts (except for connector metal parts) AC 500 V 1 min.
Vibration resistance
(Screw installation)		 10 to 55 Hz (1 cycle/min.) double amplitude of 1.5 mm 0.059 in (controller: 0.75 mm 0.030 in), in X, Y and Z directions for two hours each
Shock resistance
(Screw installation)		 20 G or more, in X, Y and Z directions for three times each
Ambient temperature 0 to +50 ℃ +32 to +122 ℉,
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity 35 % to 85 % RH (No dew condensation)

Note:
If there is no description for measurement conditions, the test is performed under operating voltage 24 V DC, ambient temperature +20° C +68 ℉, gain AUTO, response frequency 10 Hz, interference prevention OFF and white ceramics as a target at a measurement center distance.

Return to top

Specifications
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE
Related Information
Service & Support

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)