【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Communication Unit for Digital Displacement Sensors SC-HG1
Direct transfer of high-precision measurement values
New Communication Unit for the HG-T and HG-S Series!
Communication unit for EtherCAT SC-HG1-ETC |
|
Communication unit for CC-Link IE Field SC-HG1-CEF |
|
Communication unit for CC-Link SC-HG1-C |
|
Communication unit for RS-485 SC-HG1-485 |
|
|
December 2019 Compatible with self-monitoring function.
- EtherCAT communication unit SC-HG1-ETC : Compatible
- CC-Link IE Field communication unit SC-HG1-CEF : Units shipped in and after December 2019 are compatible.
- CC-Link communication unit SC-HG1-C : Units manufactured in and after December 2019 are compatible.
- RS-485 communication unit SC-HG1-485 : Units manufactured on and after November 18, 2019 are compatible.
Features
Direct Connection to High-Speed EtherCAT [SC-HG1-ETC]
Acquires various numeric data from thru-beam type digital displacement sensor HG-T series and contact-type digital displacement sensor HG-S series and allows change of their settings.
- Connects HG-T / HG-S series digital displacement sensors directly to EtherCAT!
- Enables change of various settings all at once.
Allows switching of controller's internal banks.
- Obtains high-accuracy measurement data without a program.
|
|
* |
EtherCAT® is a registered trademark patent-protected technology, licensed by Beckhoff Automation GmbH of Germany. |
|
|
Direct Connection to CC-Link Master
Direct transfer of high-precision measurement values in the order of 0.1 μm 0.004 mil [SC-HG1-C]
Direct connection to CC-Link
Program-less transmission of high-precision data
Batch change of internal settings via CC-Link
|
* When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit. |
|
For use of high-precision measurement results as traceability data [SC-HG1-485]
Transfers not only measurements results obtained at multiple points but also setting statuses as digital data in a batch!
Provides powerful support to the management of inspection records and identification of failure causes.
|
* |
When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit. |
|
|
USB-based PC setting software
HG-T Configuration Tool
When the USB-based PC setting software, "HG-T Configuration Tool," is used together with the USB communication unit SC-HG1-USB or RS-485 communication unit SC-HG1-485, current values and settings in the HG-T series can be confirmed and changed using a PC.
>>Refer to "Thru-beam Type Digital Displacement Sensor HG-T - Software"
Return to top
Return to top