【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

AUTOMATION
CONTROLS

Search
Discontinued
Products



Programmable Controller FP-X0

Specifications

Specifications

Performance specifications

Items Specifications
L14R L30R L40R L40MR L60R L60MR
Controllable I/O points Control unit DC input
8 points,
Relay
output
4 points,
Transistor
output
2 points		 DC input
16 points,
Relay
output
10 points,
Transistor
output
4 points		 DC input 24 points,
Relay output 12
points,
Transistor output 4
points		 DC input 32 points,
Relay output 24
points,
Transistor output 4
points
When using FP-X E16
expansion I/O units		 - - 88 points max.
(3 expansion units
max.)		 108 points max.
When using FP-X E30
expansion I/O units		 - - 130 points max.
(3 expansion units
max.)		 150 points max.
(3 expansion units
max.)
When using FP0R
expansion units		 - - 196 points max.
(3 expansion units
max.)		 216 points max.
(3 expansion units
max.)
Programming method/Control method Relay symbol/Cyclic operation
Program memory Built-in Flash-ROM (Free of backup battery)
Program capacity 2.5 k steps 8 k steps
No of
instruction		 Basic commands Approx. 114 kinds
High-level commands Approx. 230 kinds
Processing speed 0.08 µs/step for basic
commands
0.32 µs for high-level
commands
(MV commands)		 3 k steps: 0.08 µs/step for basic commands, 0.32 µs
for high-level commands(MV commands)
After 3 k steps: 0.58 µs/step for basic commands,
1.62 µs for high-level commands(MV
commands)
  Basic time 0.15 ms
or less		 0.18 ms
or less		 0.31 to 0.35 ms
or less		 0.34 to 0.39 ms
or less
I/O refreshing + basic time When using E16: 0.4 ms × No. of units
When using E30: 0.5 ms × No. of units
When using FP0 expansion adapters: 1.4 ms + the refreshing
time of the FP0 expansion unit
Memory for processing Relays External input (X) (Note 1) 960 points 1760 points
External output (Y) (Note 1) 960 points 1760 points
Internal relay (R) 1008 points 4096 points
Special internal relay (R) 224 points
Timer・Counter (T/C) 256 points (Note 2)

1024 points (Note 2)
Timer: (1 ms, 10 ms, 100 ms, 1 s)× 32767, Counter: 1 to 32767
Link relay (L) No 2048 points
Memory area Data register (DT) 2500 words 8192 words
Special data register (DT) 420 words
Link data register (LD) No 256 words
File registration (FL) No
Index register (I) 14 words (IO to ID)
Differential points Equivalent to program capacity
Master control relay (MCR) 32 points 256 points
Label number (JP+LOOP) 100 points 256 points
No. of step programs 128 (Engineering) 1000 (Engineering)
No. of subroutines 100 500
No. of interrupt programs Input: 8 programs, timing: 1 program
Sampling trace No Yes
Comments storage All of the I/O comments,explanations and block comments can
be saved.(Free of backup battery, 328 k bytes)
PLC link function No Yes
Constant scan In unit of 0.5 ms: 0.5 ms to 600 ms
Password Available (4 or 8 digits)
Upload protection Available
Self-diagnosis function Checks of the watchdog timer and the program syntax
Program editting during
Run		 Available (Capacity modified simultaneously: 128 steps)
But comments cannot be modified during the process.		 Available (Capacity modified simultaneously: 512 steps)
But comments can be modified during the process.
Downloading during Run Available
High-speed
counter
(Note 3,4)		 Body input 1-phase, 4-channel
(20 kHz max.)
and 2-phase, 2-channel
(20 kHz max.)		 1-phase, 4-channel (50 kHz max.)
and
2-phase, 2-channel (20 kHz max.)
Pulse output/
PWM output
(Note 3,4)		 Body output Pulse:
1-channel
(20 kHz max.)
PWM:
1-channel
(1.6 kHz max.)		 Pulse:
2-channel
(20 kHz max.)
PWM:
2-channel
(1.6 kHz max.)		 Pulse: 2-channel (50 kHz)
PWM: 2-channel(3.0 kHz max.)
Pulse catch input/
Interrupt program		 8 points
(High-speed counting and interrupt input included)
Periodical interrupt 0.5 ms unit: 0.5 ms to 1.5 sec., 10 ms unit: 10 ms to 30 sec.
Analog input No 2-channel (For inputting any of the
following items in each channel)
Potentiometer input
Min. resistance value of potentiometer:
5 kΩ
10-bit resolution (K0 to K1000)
Accuracy ± 1.0% F.S.+ accuracy of
external reistors
Thermistor input
For inputting the resistance value of the
thermistor
(Min. resistance value of external
thermistors + external resistance value
> 2 kΩ)
10-bit resolution (K0 to K1023)
Accuracy ± 1.0% F.S.+ accuracy of
external thermistors
Voltage input
Absolute max. input voltage: 10 V
10-bit resolution (K0 to K1023)
Accuracy ± 2.5% F.S.(F.S. = 10 V)
Calendar/clock No Yes
Flash ROM
backup
(Note 5)		 Backup made
according to
commands of
F12 and P13		 Data memory
(2500 words)		 Data memory
(8192 words)
Automatic
backup when
power OFF		 Counter: 6 points
(C250 to C255)
Process value of the
counter: 6 points
(EV250 to EV255)
Internal relays: 5 points
(WR58 to WR62)
Data memory: 300 words
(DT2200 to DT2499)		 Counter: 16 points (C1008 to C1023)
Process value of the counter: 16 points
(EV1008 to EV1023)
Internal relays: 8 points
(WR248 to WR255)
Data memory: 302 words
(DT7890 to DT8191)
Backup battery No Yes (Backup lasting for the whole process)
RS485 communication port No Yes No Yes

Notes:1) The actual usable points depend on the combination of the hardware.
2) The points of the timer can be added as required.
3) The rated voltage is 24 V DC at +25 ℃+77℉. The frequency may fall according to the changes of the voltage, temperature and operating conditions.
4) The maximum frequency may vary with the difference of the operating method.
5) The allowable writing operation is within 10000 times. Areas to be held and not held can be specified using the system registers.

General specifications

Items Specifications
CE marking directive compliance Low Voltage Directive, EMC Directive, RoHS Directive
Operating temperature 0 to +55℃ +32 to +131℉
Storage temperature -40 to +70℃−40 to +158℉
Operating humidity 10 to 95% RH
(at 25℃+77℉, no condensation)
Storage humidity 10 to 95% RH
(at 25℃+77℉, no condensation)
Withstand voltage
(Note 1)
(Note 2)		 Input terminals ⇔
Relay output terminals		 2300 V AC, 1 minute
All of the transistor output terminals ⇔
All of the relay output terminals
All of the input terminals⇔
All of the power supply terminals and
functional ground terminals
All of the relay output terminals ⇔
All of the power supply terminals and
functional ground terminals
All of the transistor output terminals ⇔
All of the power supply terminals and
functional ground terminals
Power supply terminals ⇔
Ground terminals		 1500 V AC,1 minute
Input terminals ⇔
Transistor output terminals		 500 V AC,1 minute
Insulation resistance
(Note 1)		 Input terminals ⇔
Output terminals		 100 MΩ min.
(500 V DC insulation
resistance meter)
All of the transistor output terminals ⇔
All of the relay output terminals
All of the input terminals ⇔
All of the power supply terminals and
functional ground terminals
All of the output terminals ⇔
All of the power supply terminals and
functional ground terminals
Power supply terminals ⇔
Ground terminals
Vibration resistance 5 to 8.4 Hz, 3.5 mm 0.138 inamplititude in one direction, 1 scan/1 minute
8.4 to 150 Hz,fixed acceleration of 9.8 m/s2, 1 scan/1 minute
10 minutes in X,Y,Z direction each
Shock resistance 147 m/s2, 4 times in X, Y, Z directions each
Noise immunity 1500 V [p-p] pulse width 50 ns, 1 μs
(Measured from nosie simulation method AC power supply termianls)
Operating environment No corrosive gases or too much dust
Conformed EC
Directives		 EMC Directive: EN61131-2,
Low Voltage Directive: EN61131-2
Overvoltage class II
Pollution level 2
Weight L14R: approx. 280g
L30R: approx. 450g
L40R/L40MR: approx. 530g
L60R/L60MR: approx. 730g

Note 1) The programmable port, RS485 communication port and the internal digital circuit part are non-insulation type.
Note 2) The cut-off current is 5 mA (The default value when shipped from the factory).

Power supply specifications

· AC power supply

Items Specifications
L14R L30R, L40R, L40MR, L60R, L60MR
Rated voltage 100 to 240 V AC
Applied voltage range 85 to 264 V AC
Inrush current 35A max.(at 240 V AC and 25℃+77℉) 40A max.(at 240 V AC and 25℃+77℉)
Momentary power off time 10 ms (when 100 V AC used)
Frequency 50/60 Hz(47 to 63 Hz)
Leakage current 0.75 mA max.between the input and protectice ground terminals
Service life of built-in power supply 20000 h (at 55℃+131℉)
Fuse Built-in (replacement disabled)
Insulation system Transformer isolation
Screw of terminal block M3

· Univeral power supply for intput (output) (L30/L40/L60 only)

Items Specifications
Rated output voltage 24 V DC
Applied voltage range 21.6 to 26.4 V DC
Rated output current 0.3A
Overcurrent protection (Note) Yes
Screw of terminal block M3

Note) Output short protection is a temporary overcurrent protection. When the short is detected, all the power supplies of PLC will be turned OFF.
If the current load out of this specifi cation is connected and in consecutive over-loaded status, failures may occur.

Input specifications

Items Specifications
L14R L30R L40R L40MR L60R L60MR
Insulation method Optical coupler
Rated input voltage 24 V DC
Applied voltage range 21.6 V DC to 26.4 V DC
Rated input current Approx. 3.5 mA (Control uint: X0 to X3); Approx. 4.3 mA (Control unit: X4 and the following ones)
Input points per common 8 points/COM (L14R),16 points/COM (L30R),
24 points/COM (L40R),16 points/COM×2 (L60R)
(Input power supply +/- are both available.)
Min. ON voltage/Min. ON current 19.2 V DC/3 mA
Max. OFF voltage/Max. OFF current 2.4 V DC/1.0 mA
Input impedance Approx. 6.8 kΩ (Control units: X0 to X3), Approx.5.6 kΩ (control unit X4 and the following ones)
Response time OFF→ON For X0 to X3, 1 ms max.: common input
25 µs max.(Note): When setting high-speed
counter, pulse catching
input and interrupt input
X4 and the following ones: 1 ms max.		 For X0 to X3, 1 ms max.: common input
10 µs max.(Note): When setting high-speed
counter, pulse catching input and
interrupt input
X4 and the following ones: 1 ms max.
ON→OFF Same as the above.
Action indicator LED indication
EN61131-2 application type TYPE 3 standard (Depending on the above-mentioned specifi cations)

Note) The specifications mentioned above are at rated 24 V DC and operationg temperature of 25℃.

·Circuit diagram

Circuit diagram
X0 to X3 : R1 = 6.8 kΩ, R2 = 820 Ω
X4 and the following : R1 = 5.6 kΩ, R2 = 1 kΩ

Output specifications

· Relay output specifictions

Items Specifications
L14R L30R L40R L40MR L60R L60MR
Insulation method Relay insulation
Output form 1a output (Relay replacement disabled)
Rated control
capacity (Resistance
load) (Note)		 2A 250 V AC, 2A 30 V DC
(per point)
Output points per
common		 1 point/
COM×2
2 points/
COM×1		 2 points/
COM×1
4 points/
COM×2		 1 point/COM×2
2 points/COM×1
4 points/COM×2		 4 points/COM×6
Response
time		 OFF→ON Approx. 10 ms
ON→OFF Approx. 8 ms
Life Mechanical 20000000 times min.(Switching frequency 180 times/minute)
Electrical 100000 times min. (Depending on the rated control capacity, switching
frequency of 20 times/minute)
Surge absorber No
Action indicator LED indication

Note) There are restrictions on the rated current for each output block. Each usable rated current is as below.
L14:Y2 to Y5(4 points) Max. 6A in total
L30:Y4 to YD(10 points) Max. 8A in total
L40:Y4 to YFD(12 points) Max. 8A in total
L60:Y4 to YB(8 points) Max. 8A in total,YC to Y1B(16 points) Max. 8A in total

·Circuit diagram

·Transistor (NPN) output specifications

Items Specifications
L14R L30R L40R L40MR L60R L60MR
Insulation method Optical coupler
Output method Open-collector
Rated load voltage 5 to 24 V DC
Allowable range of load voltage 4.75 to 26.4 V DC
Max. load current 0.5 A
Max. impact current 1.5 A
Output points per common 2 points/COM 4 points/COM
Leakage current at OFF status 1 µA max.
Max. voltage drop at ON status 0.3 V DC max.
Response time
(at 25℃)		 OFF→ON 10 µs max.
(Load current
over 15 mA)		 5 µs max.
(Load current over 15 mA)
ON→OFF 40 µs max.
(Load current over 15 mA)		 15 µs max.
(Load current over 15 mA)
External power supply
(Positive and negative teiminals)		 Voltage 21.6 to 26.4 V DC
Current 15 mA max.
Surge absorber Zener diode
Action indicator LED indication

·Circuit diagram
[NPN output]
[Y0 to Y3]

Return to top

Specifications
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE
Related Information
Service & Support

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)