Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Programmable Controllers / Interface Terminal > Programmable Controllers / Interface Terminal > FPΣ > Option
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
[Note]
The following applicable products and options are available continuously.
Terminal screwdriver Necessary when wiring relay output type and terminals block (Phoenix). |
AFP0806 | |
Molex connector pressure contact tool Necessary when wiring connector type and relay output type. |
AFP0805 (Molex: 57189-5000) |
|
Multi-wire connector pressure contact tool Necessary when wiring transistor output type connectors. |
AXY52000FP |
Transistor output type I/O cable(Length: 1 m 3.281 ft.) Wire-pressed terminal cable (10 leads) AWG22, 0.3 mm2 with connectors attached at one end, 1 set: 2 cables (blue and white). |
AFP0521 | |
Transistor output type I/O cable(Length: 3 m 9.843 ft.) Wire-pressed terminal cable (10 leads) AWG22, 0.3 mm2 with connectors attached at one end, 1 set: 2 cables (blue and white). |
AFP0523 |
* | Two I/O cable sets (total 4 cables) are necessary. |
---|
Flat cable connector set (10pin) If you are using flat cable connector, request the part specified below for a connector with an asymmetrical design to prevent mistaken polarity. (10 pins) |
AFP0808 (set of 4) |
|
Flat cable connector set For FP2 I/O unit and positioning unit. For simple connection using a flat cable. |
AFP2802 (2pieces) |
Terminal socket Attaches to relay output and terminal block type. Additional part |
AFP0802 (2 sockets per pack) |
|
Wire-press connector socket Attaches to transistor output type. Additional part |
AFP0807 (2 sockets per pack) |
|
FPΣ Power cable Attaches to control unit and relay output type expansion unit. Additional part Length: 1 m 3.281ft. |
AFPG805 (1 cable per pack) |
|
FPΣ Backup battery Backup for operation memory and clock/calender |
AFPG804 | |
FPΣ High capacity battery holder Battery does not come with battery holder. |
AFPG807 |
Connector terminals recommended for use with the FPΣ
TOYOGIKEN CO., LTD.
・Connector poles: 20P (Control units etc.)
Connector terminal parts numbers |
|
|
・Connector poles: 40P (Expansion units etc.)
Connector terminal parts numbers |
|
|
|
|
To learn more about connector terminals, please contact TOYOGIKEN CO., LTD. URL:https://www.togi.co.jp/en/ |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)