【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Pressure Sensors / Flow Sensors > Pressure Sensors / Flow Sensors > Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100
Thin body controller can do cascade connection and communication with upper devices
|
CE
, UKCA
Approved
DPS-400 series accommodates to the requirements for pressure sensors at production site such as miniaturization of sensors for downsizing equipment, convenient shape to fit into machines, and reduction of man-hours when it comes to replacement.
■Sensor head DPH-100 series |
■Controller DPS-400 series |
The controller is equipped with a 4-digit dual digital display. Because the threshold value can be adjusted while checking the "current value (current pressure value)", direct setting and checking of the "threshold value" is made smoothly without having to switch screen modes.
The quick-connection cables enable reductions in wiring. The connections and man-hours for the relay terminal block setup can be reduced and valuable space is saved. Also, DPS-400 series can be connected side-by-side with fiber sensors FX-300 series or laser sensors LS-400 series.
|
Ultra high-speed response time contributes to even greater productivity.
The sensor is equipped with two independent comparative outputs in which separate sensing modes can be selected.
(1) EASY mode
This mode is used for comparative output ON / OFF control.
(2) Hysteresis mode
This mode is used for setting comparative output hysteresis to the desired level and for carrying out ON / OFF control.
(3) Window comparator mode
This mode is used for setting comparative output ON or OFF at pressures within the setting range.
(4) Forced output ON mode
The comparative outputs are forcibly maintained at ON irrespective of the set values.
(5) Forced output OFF mode
The comparative outputs are forcibly maintained at OFF irrespective of the set values.
Using a hexagonal wrench, obstructions can be avoided and installation can be done easily by turning the bolt from above.
During maintenance, the sensor head needed to be removed can be easily removed from directly above. |
Because the dead zone caused by the nut is eliminated, the narrowed-down thickness after installation contributes to space saving. |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)