Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Area Sensors > Small / Slim Object Detection Area Sensor NA1-11
Discontinuation plan
|
|
Cross-beam scanning system to detect slim objects
|
UL
, CE
Approved
UL : Recognition(Excluding 5 m cable length type)
Slim objects can be detected by the cross-beam scanning system. |
A minimum sensing object size of ø13.5 mm ø0.531 in can be detected by an emitting and receiving element pitch of 10 mm 0.394 in. |
Though being extremely slim, it has a wide sensing area of 1 m 3.281 ft length and 100 mm 3.937 in width. It is most suitable for object detection on a wide assembly line, or for detecting the dropping or incursion of small objects whose travel path is uncertain. |
It is extremely slim, being just 10 mm 0.394 in thick . |
It is possible to select from two cable orientation directions. |
It conforms to the EMC Directive and the UL Recognition.
Moreover, PNP output type, which is much in demand in Europe, is also available.
Wiring is saved and made simple as no synchronization wire is required between the emitter and the receiver. |
A clearly visible large indicator, having a 55 mm 2.165 in width, is incorporated on both the emitter and the receiver. Further, if the sensing output is directly connected to the large indicator input, the indicator can be conveniently used as a large operation indicator. |
In a conventional area sensor, slim objects cannot be detected since the emitting and the receiving elements are scanned synchronously as a set. In contrast, in NA1-11, only the elements 1 to 11 of the emitter are scanned to obtain emission. The elements of the receiver are not scanned, so that when element 1 of the emitter emits light, all the elements of the receiver receive light. Hence, even if there is one element on the receiver which does not receive light, it results in light interrupted operation. With this technique, detection of slim objects is possible.
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)