【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Fiber Sensors > Manually Set Fiber Sensor FX-311 > Order guide

Manually Set Fiber Sensor FX-311

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Order guide

Order guide

Amplifiers

Quick-connection cable is not supplied with the amplifier. Please order it separately.

Manually set

Type	Model No.	Emitting element	Output
NPN output	FX-311	Red LED	NPN open-collector transistor
	FX-311B	Blue LED
	FX-311G	Green LED
PNP output	FX-311P	Red LED	PNP open-collector transistor
	FX-311BP	Blue LED
	FX-311GP	Green LED

Quick-connection cables

Quick-connection cable is not supplied with the amplifier. Please order it separately.

Type	Model No.	Description
Main cable (3-core)	CN-73-C1	Length: 1 m 3.281 ft	0.2 mm² 3-core cabtyre cable, with connector on one end Cable outer diameter: ø3.3 mm ø0.130 in
	CN-73-C2	Length: 2 m 6.562 ft
	CN-73-C5	Length: 5 m 16.404 ft
Sub cable (1-core)	CN-71-C1	Length: 1 m 3.281 ft	0.2 mm² 1-core cabtyre cable, with connector on one end Cable outer diameter: ø3.3 mm ø0.130 in
	CN-71-C2	Length: 2 m 6.562 ft
	CN-71-C5	Length: 5 m 16.404 ft

(Note):	The material of Quick-connection cable will be changed from production in March 2013, as soon as the previous ones are shipped out. ・Conductor cross-sectional area has been changed from 0.15mm² to 0.2mm². ・Sheath diameter has been changed from ø3.0mm to ø3.3mm.

Main cable

CN-73-C□

Sub cable

CN-71-C□

End plates

End plates are not supplied with the amplifier. Please order them separately when the amplifiers are mounted in cascade.

Appearance	Model No.	Description
	MS-DIN-E	When amplifiers are mounted in cascade, or when an amplifier moves depending on the way it is installed on a DIN rail, these end plates clamp amplifiers into place on both sides. Make sure to use end plates when cascading multiple amplifiers together. Two pcs. per set