Proposal of a new "management and setting" method for sensors
Setting and checking incident light intensity for digital sensors FX-501(P), FX-502(P), FX-301(P)/305(P),
LS-501(P)/403., DPS-401(P)/402(P) and analog input unit SC-A01/A02, SC-T1JA that are scattered inside and outside equipment can be carried out remotely for all sensors by using the SC-GU1-485, which greatly improves ease of operations such as monitoring equipment that is running and also equipment starting and maintenance.
|Note:||Used when the output signal is sent via a SC-GU1-485 to the PLC.
If the output signal is sent directly to the PLC, a quick-connection cable(sub cable) (CN-72-C□, CN-71-C□) should be used.
RS-485 communication provides a high level of general compatibility so that any type of PLC can be used.
Integration with existing systems is possible without the need to change PLCs.
* The maximum number of units is 12 for configurations including either the FX-501(P)/502(P) or LS-501(P).
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)