【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Fiber Sensors > SC > Order guide

SC

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Partly Order Discontinued
SC-T8J, SC-T8J-P, SC-TP8J

	September 30, 2015
	SC-E81, SC-E82

Order guide

Order guide

Designation	Model No.	Description
Main unit (Note1)	SC-MIL	The MIL connector allows up to 16 input / output device connections to a PLC or custom circuit board, in a single step.
Separate unit (Note1)	SC-MIL-S	Distributed installations are possible through the use of a main unit and MIL connectors.
1-channel connector input extension unit	SC-T1J	For NPN output devices	Allows the connection of input device, such as sensor or switch. Incorporates a power indicator and an input signal indicator (1 ch).
1-channel connector input extension unit	SC-T1J-P	For PNP output devices
e-CON 1-channel connector input extension unit	SC-E1	This extension unit can be connected to commercially available devices including an NPN output type or DC 2-wire type sensor. Includes power and input signal indicators (for one channel). When using in combination with the SC-GU3 series, use with the SC-71.
e-CON 8-channel connector input extension unit	SC-E81	This extension unit can be connected to eight NPN output type devices. Includes power and input signal indicators (for eight channels).
e-CON 8-channel connector input extension unit (Without an input signal indicator)	SC-E82	This extension unit can be connected to eight commercially available devices and output devices including an NPN/PNP output type sensors, switches or DC 2-wire sensors. Includes a power indicator. Does not include an input signal indicator.
Non-line connector	CN-70	This one-touch connector is used to connect the main unit to the following devices: The FX-501/502/301/305/311 and FX-411/412 fiber sensor, the LS-401/403 laser sensor, digital pressure sensor DPS-401/402, the GA-311 compact inductive proximity sensor, the FX-CH(-P) bank selection unit and the SC-T1J(-P) 1-channel connector input extension unit. (Note 2, 3)
End plates	MS-DIN-E 2 pcs. per set	When SC series units are connected on a DIN rail, these end plates clamp amplifiers into place on both sides. Make sure to use end plates when cascading multiple amplifiers together.

Notes:

1)	Conditions of connectable DC 2-wire type input device • Leak current: 1 mA or less (when the power is OFF), Offset voltage: 3 V or less (when the power is ON) • Product whose load current range includes 5 to 8 mA
2)	The non-line connector now can be used with 4-pin types, such as the FX-305 and LS-401, since its production run starting in August 2004.
3)	The 2-output type can output the output 1 (OUT 1) only from SC-MIL. There is no connection for output 2 (OUT2).

Discontinued products

* Substitute products will not guarantee the specifications of discontinued products.
Please check the specification details from catalog before use.

Discontinued product
Product number	Part number	Last time buy	Product number	Series	Remark
SC-T8J	SC-T8J	September 30, 2015 To be discontinued	SC-E81	Commnunication Unit for Open Network SC-GU3	If it is connected to SC-MIL/SC-MIL-S, the compatible installation tool for SC is needed.
SC-T8J-P	SC-T8J-P	September 30, 2015 To be discontinued	SC-E82	Commnunication Unit for Open Network SC-GU3	If it is connected to SC-MIL/SC-MIL-S, the compatible installation tool for SC is needed.
SC-TP8J	SC-TP8J	September 30, 2015 To be discontinued	SC-E82	Commnunication Unit for Open Network SC-GU3	If it is connected to SC-MIL/SC-MIL-S, the compatible installation tool for SC is needed.