AUTOMATION
CONTROLS

Search
Discontinued
Products



Compact Photoelectric Sensor CX-400 Ver.2

Option

Designation Model No. Slit size Sensing range Min. sensing object
Slit mask Sensor Slit on
one side
Slit on
both sides
Slit on
one side
Slit on
both sides
Round slit mask
(For
thru-beam type
sensor only)
OS-CX-05 CX-411□ ø0.5 mm
ø0.020 in
400 mm 15.748 in 20 mm 0.787 in ø12 mm
ø0.472 in
ø0.5 mm ø0.020 in
CX-412□ 600 mm 23.622 in 30 mm 1.181 in
CX-413□ 1,200 mm 47.242 in 60 mm 2.362 in
OS-CX-1 CX-411□ ø1 mm
ø0.039 in
900 mm 35.433 in 100 mm 3.937 in ø12 mm
ø0.472 in
ø1 mm ø0.039 in
CX-412□ 1.35 m 4.429 ft 150 mm 5.906 in ø1.5 mm ø0.059 in
CX-413□ 2.7 m 8.857 ft 300 mm 11.811 in
OS-CX-2 CX-411□ ø2 mm
ø0.079 in
2 m 6.562 ft 400 mm 15.748 in ø12 mm
ø0.472 in
ø2 mm ø0.079 in
CX-412□ 3 m 9.843 ft 600 mm 23.622 in ø3 mm ø0.118 in
CX-413□ 6 m 19.685 ft 1,200 mm 47.242 in
Rectangular
slit mask
(For
thru-beam type
sensor only)
OS-CX-05 × 6 CX-411□ 0.5 × 6 mm
0.020 × 0.236 in
2 m 6.562 ft 400 mm 15.748 in ø12 mm
ø0.472 in
0.5 × 6 mm
0.020 × 0.236 in
CX-412□ 3 m 9.843 ft 600 mm 23.622 in
CX-413□ 6 m 19.685 ft 1,200 mm 47.242 in
OS-CX-1 × 6 CX-411□ 1 × 6 mm
0.039 × 0.236 in
3 m 9.843 ft 1 m 3.281 ft ø12 mm
ø0.472 in
1 × 6 mm
0.039 × 0.236 in
CX-412□ 4.5 m 14.764 ft 1.5 m 4.921 ft
CX-413□ 9 m 29.528 ft 3 m 9.843 ft
OS-CX-2 × 6 CX-411□ 2 × 6 mm
0.079 × 0.236 in
5 m 16.404 ft 2 m 6.562 ft ø12 mm
ø0.472 in
2 × 6 mm
0.079 × 0.236 in
CX-412□ 7.5 m 24.606 ft 3 m 9.843 ft
CX-413□ 15 m 49.213 ft 6 m 19.685 ft
  Model No. Sensing range Min. sensing object
Interference
prevention filter
(For CX-411□ only)
PF-CX4-V
(Vertical, Silver)2 pcs. per set
5 m 16.404 ft (Note 1) ø12 mm ø0.472 in
(Note 1)
PF-CX4-H
(Horizonal, Light brown) 2 pcs. per set
Reflector
(For
retroreflective type
sensor only)
RF-210 CX-491□ 1 m 3.281 ft (Note 2) ø30 mm ø1.181 in
CX-493□ 1.5 m 4.921 ft (Note 2)
CX-481□ -
CX-483□ 0.1 to 0.3 m 0.3288 to 0.984 ft (Note 2)
CX-482□ 0.1 to 0.6 m 0.328 to 1.969 ft (Note 2)
RF-220 CX-491□ 1.5 m 4.921 ft (Note 2) ø35 mm ø1.378 in
CX-493□ 3 m 9.843 ft (Note 2)
CX-481□ 50 to 300 mm 1.969 to 11.811 in (Note 2)
CX-483□ 0.1 to 0.7 m 0.328 to 2.297 ft (Note 2)
CX-482□ 0.1 to 1.3 m 0.328 to 4.265 ft (Note 2)
RF-230(Note 3) CX-491□-Y 3 m 9.843 ft (Note 2) ø50 mm ø1.969 in

Notes:

1) Value when attached on both sides.
2) Set the distance between the CX-491□/493□ and the reflector to 0.1 m 0.328 ft or more.
However, see the table below for CX-48□.
The sensing range "A" may vary depending on the shape of sensing object.
Be sure to check the operation with the actual sensing object.

Model No. A B
Sensor Reflector
CX-481□ RF-220 50 to 300 mm 1.969 to 11.811 in 100 to 300 mm 3.937 to 11.811 in
CX-483□ RF-220 0.1 to 0.7 m 0.328 to 2.297 ft 0.2 to 0.7 m 0.656 to 2.297 ft
RF-210 0.1 to 0.3 m 0.328 to 0.984 ft 0.1 to 0.3 m 0.328 to 0.984 ft
RF-230 0.05 to 1 m 0.164 to 3.281 ft 0.1 to 1 m 0.328 to 3.281 ft
CX-482□ RF-220 0.1 to 1.3 m 0.328 to 4.265 ft 0.5 to 1.3 m 1.640 to 4.265 ft
RF-210 0.1 to 0.6 m 0.328 to 1.969 ft 0.3 to 0.6 m 0.984 to 1.969 ft
3) RF-230 is attached to the retroreflective type sensor other than the basic type.

Round slit mask

・OS-CX-□
Fitted on the front face of the sensor with one-touch.

OS-CX-□

Rectangular slit mask

・OS-CX-□ × 6
Fitted on the front face of the sensor with one-touch.

OS-CX-□×6

Interference prevention filter

・PF-CX4-V
(Vertical, Silver)
・PF-CX4-H
(Horizontal, Light brown)
Two sets of CX-411□ can be mounted close together.

PF-CX4-V, PF-CX4-H

Reflector

・RF-210

RF-210

・RF-220

RF-220

・RF-230

RF-230
Designation Model No. Description
Reflector
mounting
bracket
MS-RF21-1 Protective mounting bracket for RF-210
It protects the reflector from damage and maintains alignment.
MS-RF22 For RF-220
MS-RF23 For RF-230
Reflective tape RF-11 ・Sensing range (Note 4):
0.5 m 1.640 ft [CX-491□]
0.8 m 2.625 ft [CX-493□
・Ambient temperature:
-25 to +50 ℃
-13 to +122 ℉
・Ambient humidity:
35 to 85 % RH
Notes:
1) Keep the tape free from stress. If it is pressed too much, its capability may deteriorate.
2) Do not cut the tape. It will deteriorate the sensing performance.
RF-12 ・Sensing range (Note 4):
0.7 m 2.297 ft [CX-491□]
1.2 m 3.937 ft [CX-493□]
0.1 to 0.6 m
0.328 to 1.969 ft [CX-482□]
RF-13 ・Sensing range (Note 5):
0.5 m 1.640 ft [CX-491□]
・Ambient temperature:
-25 to +55 ℃ -13 to +131 ℉
・Ambient humidity: 35 to 85 % RH
Sensor
mounting
bracket
(Note 1)
MS-CX2-1 Foot angled mounting bracket
It can also be used for mounting RF-210.
The thru-beam type sensor needs two brackets.
MS-CX2-2 Foot biangled mounting bracket
It can also be used for mounting RF-210.
MS-CX2-4 Protective mounting bracket
MS-CX2-5 Back biangled mounting bracket
MS-CX-3 Back angled mounting bracket
Universal
sensor mounting
stand
(Note 2)
MS-AJ1 Horizontal mounting type Basic assembly
MS-AJ2 Vertical mounting type
MS-AJ1-A Horizontal mounting type Lateral arm assembly
MS-AJ2-A Vertical mounting type
MS-AJ1-M Horizontal mounting type Assembly for refl ector
MS-AJ2-M Vertical mounting type
Sensor checker
(Note 3)
CHX-SC2 It is useful for beam alignment of thru-beam type sensors.
The optimum receiver position is given by indicators, as well as an audio signal.

Notes:

1) The plug-in connector type sensor does not allow use of some sensor mounting brackets because of the protrusion of the connector.
2) Refer to the MS-AJ for details of the universal sensor mounting stand.
3) Refer to the CHX-SC2 for details of the sensor checker CHX-SC2.
4) Set the distance between the sensor and the reflective tape to 0.1 m 0.328 ft (CX-482□: 0.4 m 1.312 ft) or more.
5) Set the distance between the sensor and the reflective tape to 0.2 m 0.656 ft or more.

Reflector mounting bracket

・MS-RF21-1

MS-RF21-1
Two M3 (length 12 mm 0.472 in) screws with washers are attached.

・MS-RF22

MS-RF22
Two M3 (length 8 mm 0.315 in) screws with washers are attached.

・MS-RF23

MS-RF23
Two M4 (length 10 mm 0.394 in) screws with washers are attached.

Reflective tape

・RF-11

RF-11

・RF-12

RF-12

・RF-13

RF-13

Sensor mounting bracket

・MS-CX2-1

MS-CX2-1
Two M3 (length 12 mm 0.472 in) screws with washers are attached.

・MS-CX2-2

MS-CX2-2
Two M3 (length 12 mm 0.472 in) screws with washers are attached.

・MS-CX2-4

MS-CX2-4
Two M3 (length 14 mm 0.551 in) screws with washers are attached.

・MS-CX2-5

MS-CX2-5
Two M3 (length 12 mm 0.472 in) screws with washers are attached.

・MS-CX-3

MS-CX-3
Two M3 (length 12 mm 0.472 in) screws with washers are attached.

Universal sensor mounting stand

・MS-AJ1

MS-AJ1

・MS-AJ1-A

MS-AJ1-A
With the lateral arm, the sensor can sense from above a production line.
Forward / back adjustment: 130 mm 5.118 in approx.

・MS-AJ1-M

MS-AJ1-M

・MS-AJ2

MS-AJ2

・MS-AJ2-A

MS-AJ2-A
With the lateral arm, the sensor can sense from above a production line. Forward / back adjustment: 130 mm 5.118 in approx.

・MS-AJ2-M

MS-AJ2-M

Sensor checker

・CHX-SC2

CHX-SC2

Recommended e-CON connector

Manufactured by 3M Japan Limited
Adapted connector : 37104-3122-000 FL

Please refer to "Introducing the 3M™ mini-clamp connector" for details.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

FAQ


Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)