【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > Wafer Detection Sensor DS(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Type | Fixed-focus (for wafer sensing) | |||
---|---|---|---|---|
Side sensing | Top sensing | |||
Model No. | DS-L10 | DS-L10H | DS-L24H | |
Applicable amplifier | DS-A1 | |||
Sensing range (Note 1) | 2 to 8mm (Note 2) | 5 to 24mm (Note 2) | ||
Max. sensing distance | 10.0±1.5mm (Note 2) | 30±4mm (Note 2) | ||
Min. sensing object | ø0.05mm copper wire (Setting distance: 5mm with no background) |
ø0.16mm copper wire (Setting distance: 14mm with no background) |
||
Hysteresis | 100μm or less | 1.36mm or less | ||
Repeatability | Along sensing axis: 10μm or less Perpendicular to sensing axis: 50μm or less (setting distance: 5mm) |
Along sensing axis: 10μm or less Perpendicular to sensing axis: 50μm or less (setting distance: 14mm) |
||
Environmental resistance | Ambient temperature | 0 to +50℃ (No dew condensation), Storage:-20 to +70℃ | ||
Ambient humidity | 35 to 85% RH, Storage: 35 to 85% RH | |||
Ambient illuminance | Sunlight: 11,000lx at the light-receiving face Incandescent light: 3,500lx at the light-receiving face |
Incandescent light: 70,000lx at the light-receiving face | ||
Voltage withstandability | 1,500V AC for one min. between all supply terminals connected together and enclosure | |||
Insulation resistance | 20MΩ, or more, with 500V DC megger between all supply terminals connected together and enclosure | |||
Vibration resistance | 10 to 55Hz frequency, 1.5mm amplitude in X, Y and Z directions for two hours each | |||
Shock resistance | 500m/s2 acceleration (50G approx.) in X, Y and Z directions for three times each | |||
Emitting element | Infrared LED (modulated) | |||
Temperature characteristics | Over ambient temperature range 0 to +50℃: within ±1% of sensing range at 20℃ | |||
Material | Enclosure: ABS | |||
Cable | 0.08mm2 composite 3-core shielded cable, 3m long | |||
Cable extension | Extension up to total 5m is possible with an equivalent cable. | |||
Weight | 80g approx. | |||
Accessory | MS-DS-1 (Sensor head mounting bracket): 1 set |
Note1 : | The sensing range gives the setting distance for presence detection. For sensing minute difference, use by setting at the maximum sensing distance. |
---|---|
Note2 : | The sensing range and the maximum sensing distance are specified for white non-glossy paper (DS-L10 and DS-L10H: 20 x 20mm, DS-L24H: 50 x 50mm) as the object. |
Type | Dedicated amplifier | |
---|---|---|
Model No. | DS-A1 | |
Applicable sensor heads | DS-L10, DS-L10H, DS-L24H | |
Supply voltage | 12 to 24V DC±10% Ripple P-P 10% or less | |
Current consumption | 40mA or less | |
Output | NPN transistor universal ・Maximum sink current: 100mA ・Residual voltage: 1V or less (at 100mA sink current) 0.4V or less (at 16mA sink current) |
|
Output operation | Switchable either Light-ON or Dark-ON with the operation mode switch | |
Short-circuit protection | Incorporated | |
Response time | 3ms or less | |
Operation indicator | Red LED (lights up when the output is ON) | |
Span adjuster | Continuously variable adjuster (enables fine adjustment of the maximum sensing distance) | |
Environmental resistance | Ambient temperature | 0 to +50℃ (No dew condensation), Storage:-20 to +70℃ |
Ambient humidity | 35 to 85% RH, Storage: 35 to 85% RH | |
Noise immunity | Power line: 200Vp, 1μs pulse width; Radiation: 1,300Vp, 1μs pulse width (with noise simulator) | |
Voltage withstandability | 1,500V AC for one min. between all supply terminals connected together and enclosure | |
Insulation resistance | 20MΩ, or more, with 500V DC megger between all supply terminals connected together and enclosure | |
Vibration resistance | 10 to 55Hz frequency, 1.5mm amplitude in X, Y and Z directions for two hours each | |
Shock resistance | 100m/s2 acceleration (10G approx.) in X, Y and Z directions for three times each | |
Material | Enclosure: Polycarbonate, Terminal base: PBT | |
Weight | 15g approx. | |
Accessory | Adjusting screwdriver: 1 No. |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)