AUTOMATION
CONTROLS

Search
Discontinued
Products



Amplifier built-in Ultra-slim Photoelectric Sensor EX-10S

Cautions For Use

  • Do not use this product for an application where it directly detects the human body. Otherwise, there is a risk of death or serious injury.
  • When the human body needs to be detected for safety application, use products that conform to the laws and standards related to human body detection for safety application in each country, such as OSHA, ANSI, and IEC.
  • This product is not a safety sensor designed or intended to protect life and prevent bodily injury or property damage from dangerous parts of machinery.
  • This product conforms to the international standard ISO 13849-1 (Category 1, PLc) and can be used as a detection device to indirectly protect the human body.
  • When using this product as a part of the safety system, observe the precautions summarized in the "EX-10 series Users Manual" . The "EX-10 series Users Manual" explains important rules that must be observed to prevent personal injury and property damage when using the product as a part of the safety system. The "EX-10 series Users Manual" can be downloaded from the following website.

    >>Go to Data download.

Mounting

  • In case of mounting on tapped holes (Unit: mm in)

Mounting In case of mounting on tapped holes (Unit: mm in)

The tightening torque should be 0.2 N·m or less.

  • In case of using attached screws and nuts (Unit: mm in)

Mounting In case of using attached screws and nuts (Unit: mm in)

The tightening torque should be 0.2 N·m or less.

Others

  • Do not use during the initial transient time (50 ms) after the power supply is switched on.
  • Excess bending of the cable or stress applied to the cable may disconnect the internal lead wire.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)