[System Maintenance Notice]
Due to ongoing system maintenance, the site search and specification search functions are temporarily unavailable. We apologize for any inconvenience this may cause and appreciate your understanding.
【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Amplifier built-in Ultra-slim Photoelectric Sensor EX-10S
More Extensive Applications
Introducing narrow-beam type models for the EX-10 series of ultra-slim photoelectric sensors
* |
Be sure to read the "Cautions For Use" when using for the above applications. |
* |
Before using this device, be sure to confirm the standards / regulations applied in the relevant nation and region. |
* |
If you need the Certificate or Confirmation Letter, please contact us.![open link in new window](/ac/e/common/images/icon_newwin.gif) |
Features
Sensor unit complies with ISO 13849-1*1 Category 1 PLc*2 ![NEW](/ac/e/common/images/new_mark.gif)
A Category 3 PLd Safety System can be built by using Category 4 PLe compliant controllers together with our sensors
*1 Safety-related parts of control systems, Part 1: General principles for design
*2 Conformed from December 2021 production.
■ Category 3, PLd construction example
|
[Precautions when using as Category 3 PLd] Sensor redundancy is required! Observe the following when connecting to the safety controller. ・In the case the product is used in a standalone state, the safety system may not operate properly when a sensor malfunction occurs.
CAUTION The product cannot be used for human body detection.
|
■ Application examples
[Required conditions]
1. |
The source of hazards is located inside the machine and may cause hazards to nearby people. |
2. |
The equipment is classified as Category 3 PLd or lower. |
3. |
The source of hazards is isolated only by the automatic door. |
* The product can be used safely when all of the above conditions 1 through 3 are satisfied!
* There are cases where you can use it under other conditions.
Alleviates interference without slits, allowing close-spaced installation
With about half the light diffusion of previous models, narrow-beam models can be placed twice as closely together-without the added cost of purchasing and installing slits.
|
|
Detects minute objects with a diameter of just 0.5 mm 0.020 in, without slits [EX-11S□]
With about half the light diffusion of previous models, narrow-beam models can detect minute objects with a diameter of just 0.5 mm <span class="inch">0.020 in</span>, without slits.
These models provide a reasonably-priced solution for applications requiring detection of minute objects.
|
|
Long-range sensing at 1 m 3.281 ft with a narrow-beam [EX-19S□]
Narrow-beam models deliver long-range sensing at 1 m 3.281ft.
Application Example:Detecting PCB rack
Return to top
Return to top