【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > Miniature-size Photoelectric Sensor EX(Discontinued Products) > Specifications

Miniature-size Photoelectric Sensor EX (Discontinued Products)

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

	September 30, 2014

Discontinued Products
Information

Specifications

Dimensions

Specifications

■Notice of change for conforming to the revised CE Mark related directive
>> Click here

Type		Thru-beam		Diffuse reflective
Type		Side sensing	Top sensing	Side sensing
Model No.		EX-M2E	EX-M2	EX-D200E
Sensing range		2 m 6.562 ft		200 mm 7.874 in (Note 2)
Sensing object		ø7 mm ø0.276 in or more opaque object (Note 3)		Opaque, translucent or transparent object (Note 4)
Hysteresis		-		15 % or less of operation distance
Repeatability (perpendicular to sensing axis)		0.1 mm 0.004 in or less	0.04 mm 0.002 in or less	-
Supply voltage		12 to 24V DC ± 10 % Ripple P-P 10 % or less
Current consumption		Emitter: 20 mA or less, Receiver: 20 mA or less		30 mA or less
Output		NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current)
	Utilization category	DC-12 or DC-13
	Output operation	Selectable either Light-ON or Dark-ON by the control input
Response time		1 ms or less
Sensitivity adjuster		-		Continuously variable adjuster
Pollution degree		3 (Industrial environment)
Protection		IP 65 (IEC)
Ambient temperature		-10 to +60 ℃ -14 to +76 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
Emitting element		Infrared LED (modulated)
Material		Enclosure: PBT (glass fiber reinforced) Lens: Polycarbonate
Net weight		Emitter: 60 g approx. Receiver: 60 g approx.	Emitter: 60 g approx. Receiver: 65 g approx.	65 g approx.
Accessories		MS-EX-1E (Sensor mounting bracket): 2 sets	MS-EX-1 (Sensor mounting bracket): 2 sets	MS-EX-1E (Sensor mounting bracket): 1 set Adjusting screwdriver: 1 No. Adjuster cap: 1 No.
Dimensions		W10 x H26 x D12 mm W0.394 x H1.024 x D0.472 in	W10 x H15 x D25 mm W0.394 x H0.591 x D0.984 in	W10.4 x H25 x D15 mm W0.409 x H0.984 x D0.591 in

Note 1: Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

Note 2: The sensing range of the diffuse reflective type sensor is specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.

Note 3: If slit masks (optional) are fitted, an object of 0.5 x 3 mm 0.020 x 0.118 in in case of EX-M2E and 0.5 x 2 mm 0.020 x 0.079 in in case of EX-M2 can be detected.

Note 4: Make sure to confirm detection with an actual sensor before use.

Note 1:	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
Note 2:	The sensing range of the diffuse reflective type sensor is specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
Note 3:	If slit masks (optional) are fitted, an object of 0.5 x 3 mm 0.020 x 0.118 in in case of EX-M2E and 0.5 x 2 mm 0.020 x 0.079 in in case of EX-M2 can be detected.
Note 4:	Make sure to confirm detection with an actual sensor before use.