AUTOMATION
CONTROLS

Search
Discontinued
Products



Water Detection Sensor EZ-10

Cautions For Use

  • Never use this product as a sensing device for personnel protection.
  • In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country.

Mounting

  • The tightening torque should be 0.5 N·m or less.

Wiring

  • When connecting the mating cable to the plug-in connector type sensor, the tightening torque should be 0.4 N·m or less.

Stability indicator

  • The stability indicator (green) lights up when the incident light intensity has sufficient margin with respect to the operation level. If the incident light intensity level is such that the stability indicator lights up, stable sensing can be done without the light received operation and the light interrupted operation being affected by a change in ambient temperature or supply voltage.

Others

  • Because these units use special emitter and receiver elements, they are susceptible to the effects of operating ambient temperature and humidity. Sensitivity adjustment should be performed in the environment in which they will actually be used.
  • Do not use during the initial transient time (100 ms) after the power supply is switched on.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)