【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > LED Type Wafer Alignment Sensor Controller HD-T1 > Specifications

LED Type Wafer Alignment Sensor Controller HD-T1

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Specifications

Specifications

Sensor head

Model No.		HD-T1030
Applicable controller		HD-T1C
Sensing width		30 mm 1.181 in (Linearity is specified at 28 mm 1.102 in width.)
Sensing range		30 mm 1.181 in (fixed) (Note 2)
Pollution degree		3 (Industrial environment)
Ambient temperature		0 to +40 ℃ +32 to +104 ℉ (No dew condensation), Storage: -20 to +55 ℃ -4 to +131 ℉
Ambient humidity		35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance		Incandescent light: 3,000 lx or less at the light-receiving face, Fluorescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability		1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance		20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance		10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance		490 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element		Red LED (Peak emission wavelength: 650 nm 0.026 mil)
Receiving element		Photodiode
Material		Enclosure: PEI, Front cover: Glass, Mounting base: Aluminum
Cable		Heat-resistant PVC cable, 0.5 m 1.640 ft long, with a connector at the end
Weight		Net weight: 150 g approx.

Note 1: Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.

Note 2: The value is in a state that the sensor is mounted on the mounting base at the time of factory shipment.

Note 1:	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
Note 2:	The value is in a state that the sensor is mounted on the mounting base at the time of factory shipment.

Controller

Model No.		HD-T1C
Applicable sensor head		HD-T1030
Supply voltage		24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		70 mA or less (Including sensor head)
Analog output		Analog voltage - Output voltage: 1 ± 0.5 V (all light interrupted) to 5 ± 0.5 V (all light received) - Output impedance: 75 Ω
	Response time	0.5 ms or less (8 V/ms or more)
	Resolution	30 μm 1.181 mil (Note 2)
	Linearity	±1.0 % F.S. (at 28 mm 1.102 in sensing width of the sensing center) (Note 3)
	Temperature characteristics	±0.1 % F.S./℃ (at 24 ± 2 ℃ 75.2 ± 35.6 ℉) (Note 3)
Span adjustment function		Span of the analog output voltage is adjusted. 15-turn endless adjuster
Shift adjustment function		Offset of the analog output voltage is adjusted. 15-turn endless adjuster
Warming-up period		30 min. or more
Environmental resistance	Pollution degree	3 (Industrial environment)
	Ambient temperature	0 to +40 ℃ +32 to +104 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉
	Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
	Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
	Insulation resistance	20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
	Vibration resistance	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
	Shock resistance	490 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each
Material		Enclosure: Heat-resistant ABS, Connector cover: Heat-resistant ABS, Adjuster cover: Polycarbonate
Cable		0.22 mm² 3-core heat-resistant PVC cable, 0.3 m 0.984 ft long
Cable extension		Extension up to total 3 m 9.843 ft is possible with 0.3 mm², or more, heat-resistant PVC cable.
Weight		Net weight: 85 g approx.

Note 1: Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.

Note 2: Resolution refers to the peak to peak distance conversion value of analog output (in the frequency band below 20 MHz).

Note 3: This is the representative example of measurement with a combination of sensor head and controller.

Note 1:	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
Note 2:	Resolution refers to the peak to peak distance conversion value of analog output (in the frequency band below 20 MHz).
Note 3:	This is the representative example of measurement with a combination of sensor head and controller.

Specifications

If you have any questions, please select the option below to contact us or find answers.