【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > Triple Beam Adjustable Range Reflective Photoelectric Sensor MQ-W(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Type | Triple beam adjustable range reflective | |||
---|---|---|---|---|
40 mm 1.575 in type | ||||
Visible light | Low hysteresis | |||
Basic Model No. | MQ-W3A□ | MQ-W3AR□ | MQ-WN3A□ | |
Sensing distance (rated) | 40 mm 1.575 in with white non-glossy paper (10 x 10 mm 0.394 x 0.394 in) |
|||
Setting range (optimum) | 20 to 40 mm 0.787 to 1.575 in with white non‑glossy paper (10 x 10 mm 0.394 x 0.394 in) |
|||
Sensing object | Opaque or translucent object (Note 2) | |||
Hysteresis (Note 3) | 10 % or less of operation distance (with standard sensing object) |
5 % or less of operation distance (with standard sensing object) |
||
Supply voltage | 9.6 to 30 V DC | |||
Current consumption | 30 mA or less | |||
Output | NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1.2 V or less (at 100 mA sink current) |
|||
Output operation | Selectable either Light-ON or Dark-ON by the control input | |||
Response time | 2 ms or less (Response frequency: 250 Hz or more) | |||
Operation indicator | Red LED (lights up under light received condition) | |||
Stability indicator | Red LED (lights up under stable sensing condition) | |||
Distance adjuster | Continuously variable adjuster | |||
Protection | IP67 (IEC) | |||
Ambient temperature | –25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +55 ℃ –13 to +131 ℉ |
|||
Ambient humidity | 85 % RH or less, Storage: 85 % RH or less | |||
Ambient illuminance | Incandescent light: 10,000 Lx or less at the light-receiving face | |||
Voltage withstandability | 500 V AC for one min. between all supply terminals connected together and enclosure | |||
Insulation resistance | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure | |||
Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each | |||
Shock resistance | 1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions six times each | |||
Emitting element (modulated) | Infrared LED | Red LED | Infrared LED | |
Material | Enclosure: Die-cast zinc alloy | |||
Cable | 4-core cable, 2 m 6.562 ft long | |||
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | |||
Accessory | Mounting bracket: 1 set |
Notes:
1) | Where measurement conditions have not been specified precisely, the conditions use were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
2) | Make sure to confirm detection with an actual sensor before use. |
3) | This value is from the sensing distance (rated). The standard sensing object is non-glossy paper described in the "Sensing distance (rated)" item. |
Type | Triple beam adjustable range reflective | |||
---|---|---|---|---|
200 mm 7.874 in type | ||||
Visible light | Low hysteresis | |||
Basic Model No. | MQ-W20A□ | MQ-W20AR□ | MQ-WN20A□ | |
Sensing distance (rated) | 200 mm 7.874 in with white non-glossy paper (20 x 20 mm 0.787 x 0.787 in) |
|||
Setting range (optimum) | 40 to 200 mm 1.575 to 7.874 in with white non‑glossy paper (20 x 20mm 0.787 x 0.787 in) |
|||
Sensing object | Opaque or translucent object (Note 2) | |||
Hysteresis (Note 3) | 20 % or less of operation
distance (with standard sensing object) |
10 % or less of operation distance (with standard sensing object) |
||
Supply voltage | 9.6 to 30 V DC | |||
Current consumption | 30 mA or less | |||
Output | NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1.2 V or less (at 100 mA sink current) |
|||
Output operation | Selectable either Light-ON or Dark-ON by the control input | |||
Response time | 2 ms or less (Response frequency: 250 Hz or more) | |||
Operation indicator | Red LED (lights up under light received condition) | |||
Stability indicator | Red LED (lights up under stable sensing condition) | |||
Distance adjuster | Continuously variable adjuster | |||
Protection | IP67 (IEC) | |||
Ambient temperature | –25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +55 ℃ –13 to +131 ℉ |
|||
Ambient humidity | 85 % RH or less, Storage: 85 % RH or less | |||
Ambient illuminance | Incandescent light: 10,000 Lx or less at the light-receiving face | |||
Voltage withstandability | 500 V AC for one min. between all supply terminals connected together and enclosure | |||
Insulation resistance | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure | |||
Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each | |||
Shock resistance | 1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions six times each | |||
Emitting element (modulated) | Infrared LED | Red LED | Infrared LED | |
Material | Enclosure: Die-cast zinc alloy | |||
Cable | 4-core cable, 2 m 6.562 ft long | |||
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | |||
Accessory | Mounting bracket: 1 set |
Notes:
1) | Where measurement conditions have not been specified precisely, the conditions use were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
2) | Make sure to confirm detection with an actual sensor before use. |
3) | This value is from the sensing distance (rated). The standard sensing object is non-glossy paper described in the "Sensing distance (rated)" item. |
Type | Triple beam adjustable range reflective | ||
---|---|---|---|
700 mm 27.559 in type | |||
Low hysteresis | |||
Basic Model No. | MQ-W70A□ | MQ-WN70A□ | |
Sensing distance (rated) | 700 mm 27.559 in with white non-glossy paper (75 x 75 mm 2.953 x 2.953 in) |
||
Setting range (optimum) | 200 to 700 mm 7.874 to 27.559 in with white non‑glossy paper (75 x 75 mm 2.953 x 2.953 in) |
||
Sensing object | Opaque or translucent object (Note 2) | ||
Hysteresis (Note 3) | 20 % or less of operation distance (with standard sensing object) |
10 % or less of operation distance (with standard sensing object) |
|
Supply voltage | 9.6 to 30 V DC | ||
Current consumption | 30 mA or less | ||
Output | NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1.2 V or less (at 100 mA sink current) |
||
Output operation | Selectable either Light-ON or Dark-ON by the control input | ||
Response time | 2 ms or less (Response frequency: 250 Hz or more) | ||
Operation indicator | Red LED (lights up under light received condition) | ||
Stability indicator | Red LED (lights up under stable sensing condition) | ||
Distance adjuster | Continuously variable adjuster | ||
Protection | IP67 (IEC) | ||
Ambient temperature | –25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +55 ℃ –13 to +131 ℉ |
||
Ambient humidity | 85 % RH or less, Storage: 85 % RH or less | ||
Ambient illuminance | Incandescent light: 10,000 Lx or less at the light-receiving face | ||
Voltage withstandability | 500 V AC for one min. between all supply terminals connected together and enclosure | ||
Insulation resistance | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure | ||
Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each | ||
Shock resistance | 1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions six times each | ||
Emitting element (modulated) | Infrared LED | ||
Material | Enclosure: Die-cast zinc alloy | ||
Cable | 4-core cable, 2 m 6.562 ft long | ||
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | ||
Accessory | Mounting bracket: 1 set |
Notes:
1) | Where measurement conditions have not been specified precisely, the conditions use were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
2) | Make sure to confirm detection with an actual sensor before use. |
3) | This value is from the sensing distance (rated). The standard sensing object is non-glossy paper described in the "Sensing distance (rated)" item. |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)