AUTOMATION
CONTROLS

Search
Discontinued
Products



Manually Sensitivity Set Photoelectric Sensor SS-A5/SH (Discontinued Products)

Specifications

Type Cable type / slim
Model No. SS-A5
Applicable sensor heads SH-2□, SH-3□, SH-72
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption 40 mA or less
Sensing output NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between sensing output and 0 V)
・Residual voltage: 1.5 V or less (at 100 mA sink current)
0.4 V or less (at 16 mA sink current)
  Output operation Selectable either Light-ON or Dark-ON with the operation mode switch
Short-circuit protection Incorporated
Self-diagnosis output NPN open-collector transistor
・Maximum sink current: 50 mA
・Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V)
・Residual voltage: 1 V or less (at 50 mA sink current)
0.4 V or less (at 16 mA sink current)
  Output operation ON under stable sensing condition
Short-circuit protection -
Response time 1 ms or less
Operation indicator Red LED (lights up when the sensing output is ON)
Stability indicator Green LED
(lights up under stable light received condition or stable dark condition)
Sensitivity adjuster Continuously variable twin adjusters
Automatic interference prevention function Incorporated (Two units of sensors can be mounted close together.)
Timer function Approx. 40 ms fixed OFF-delay timer, selectable either effective or ineffective
Ambient temperature -25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 55 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each
Shock resistance 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions for three times each
Material Enclosure: Heat-resistant ABS, Cover: Polyethersulfone
Cable 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight Net weight: 120 g approx.
Accessories MS-DIN-1 (Amplifier mounting bracket): 1pc., Adjusting screwdriver: 1 pc., Adjuster cap: 1 pc.

Note :Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)