Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > Slim Body Automatic Sensitivity Setting Photoelectric Sensor SU-7/SH

Slim Body Automatic Sensitivity Setting Photoelectric Sensor SU-7/SH

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Discontinued

	September 29, 2023

Basic Information

Sensing characteristics

Cautions For Use

Simple and compact design

Slim Body Automatic Sensitivity Setting Photoelectric Sensor SU-7/SH

CE Approved
CE : EMC Directive(In combination with sensor heads SH-3□)

Features

■Notice of change for conforming to the revised CE Mark related directive
>> Click here

Simple automatic sensitivity setting

Anyone can carry out the optimum sensitivity setting by simply pressing two buttons.

Quick wire connection

A snap of the lever secures the connection of the sensor head cables on the SU-7 amplifier. It is no longer required to strip the wire insulation. Further, the exclusive stripper (accessory) can be used to easily peel off the sensor cable outer sheath.

Thickness: 10 mm 0.394 in

Installation space can be greatly reduced as the SU-7 amplifier is just 10 mm 0.394 in thick.
(W10 x H31.5 x D67 mm W0.394 x H1.240 x D2.638 in)

Nine advanced functions for versatile sensing

1.Limit sensitivity setting [All models]
Sensitivity for detection of minute differences can be set by the push of one button without the presence of an object.

2.Sensitivity shift [All models]
The set threshold level can be shifted from the center towards either ON or OFF level.

3.Remote sensitivity selection [SU-79]
The amplifier stores four channels of sensitivity levels.
They can be selected by the remote inputs.

4.Remote sensitivity setting [SU-77]
The sensitivity level can be adjusted from a remote place.

5.External synchronization [SU-75]
The timing for sensing can be specified by an external input.

6.Test input (emission halt) [SU-75]
Convenient for start-up inspection.

7.Sensitivity margin indication [All models]
The number of blinks of the stability indicator indicates the degree of the sensitivity margin.

8.ON-delay / OFF-delay timer [SU-7] [SU-77] [SU-79] [SU-7J]
The timer can be selected for either ON-delay or OFF-delay of 0 to 5 sec.

9.Interference prevention [All models]
Two sensor heads can be mounted close together.

Ultra-slim type [SH-2□]

・Compact size: 0.3 cm³
・Thickness: 3 mm 0.118 in

・Versatile mounting
Diffuse reflective type sensor head
- Front sensing

Thru-beam type sensor head
- Front sensing
- Side sensing

Ultra-small type [SH-3□]

・Sensor head with indicator
An operation indicator, which enables easy checking of the operation at site, has been incorporated.

・2 m 6.562 ft long sensing range with red LED beam (SH-33R)
Visible red LED beam makes alignment easy.