【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Light Curtains / Safety Components > Safety Laser Scanner Type 3 SD3-A1(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
Type | Safety laser scanner | ||||||
---|---|---|---|---|---|---|---|
Model No. | SD3-A1 | ||||||
Applicable standards |
International standards | IEC 61496-1/3 (Type 3), ISO 13849-1 (Category 3, PLd), IEC 61508-1 to 7 (SIL2), IEC 62061 (SIL2) | |||||
Japan | JIS B 9704-1/3 (Type 3), JIS B 9705-1 (Category 3), JIS C 0508 (SIL2) | ||||||
Europe (EU) | EN 61496-1 (Type 3), ISO 13849-1 (Category 3, PLd), EN 61508-1 to 7 (SIL2) | ||||||
Detection zone |
Min. sensing object setting | φ150 mm φ5.906 in |
φ70 mm φ2.756 in |
φ50 mm φ1.969 in |
φ40 mm φ1.575 in |
φ30mm φ1.181 in |
|
Sensing range (radius) | 0 to 4.0 m 0 to 13.123 ft |
0 to 4.0 m 0 to 13.123 ft |
0 to 2.8 m 0 to 9.186 ft |
0 to 2.2 m 0 to 7.218 ft |
0 to 1.6m 0 to 5.249 ft |
||
Measurement error margin extended range |
When dust suppression function is not selected: 83mm 3.268 in When dust suppression function is selected: 83 mm 3.268 in for less than 3.5 mm 0.138 in, and 100 mm 3.937 in for 3.5 mm 0.138 in or more (automatically calculated using the included software) |
||||||
Sensing object reflectance | Minimum 1.8 % | ||||||
Warning zone |
Min. sensing object setting | φ150 mm φ5.906 in (fixed) | |||||
Sensing range (radius) | 0 to 15 m 0 to 49.213 ft | ||||||
Sensing object reflectance | Minimum 20 % | ||||||
Measurement zone | Max. measurement range (radius) | 50 m 164.042 ft (fixed) | |||||
Scanning angle | 190° / 180° (by setting) | ||||||
Number of zone setting | Max. 7 + 1 (without detection zone) [Zone pairs in combination of detection zone and warning zone can be switched over by external input] |
||||||
Min. zone setting range | 200 mm 7.874 in | ||||||
Supply voltage (UB) | 24 V DC+20-30 % (IEC 60742) | ||||||
Current consumption | 300 mA approx. (excluding external connection load) | ||||||
Fuse (power supply) | 1.25 A semi-time-lag fuse | ||||||
Control outputs (OSSD 1, OSSD 2) |
PNP open-collector transistor 2 outputs • Rated operating voltage: supply voltage (UB) - 3.2 V • Max. source current: 250 mA • Residual voltage: 3.2 V or less |
||||||
Operation mode | When no object enters into the detection zone: ON, When an object enters: OFF | ||||||
Response time | Min. 80 ms (2 scans) to max. 640 ms (16 scans) switching method | ||||||
Protection circuit | Incorporated | ||||||
Warning output 1 (Alarm 1) |
PNP open-collector transistor • Rated operating voltage: supply voltage (UB) - 4 V • Max. source current: 100 mA • Residual voltage: 4 V or less |
||||||
Operation mode | Switching method of operation mode (set by below) • Not used • Main unit at normal operation: ON, Abnormal operation: OFF • When no object enters into the warning zone: ON, When an object enters: OFF • Main unit at normal operation: ON, Abnormal operation: OFF and When no object enters into the warning zone: ON, When an object enters: OFF |
||||||
Response time | Min. 80 ms (2 scans) to max. 640 ms (16 scans) switching method | ||||||
Warning output 2 (Alarm 2) |
PNP open-collector transistor • Rated operating voltage: supply voltage (UB) - 4 V • Max. source current: 100 mA • Residual voltage: 4 V or less |
||||||
Operation mode | Main unit at normal operation: ON, Abnormal operation: OFF | ||||||
Laser protection class | Class 1 [IEC 60825] | ||||||
Peak emission wavelength | 905 nm 0.036 mil | ||||||
Degree of protection | IP65 | ||||||
Ambient temperature | 0 to +50℃ +32 to +122 ℉ Storage: −20 to +60℃ −4 to +140 ℉ |
||||||
Ambient humidity | Operation and storage: Max. 95 % RH (No dew condensation) | ||||||
Vibration resistance / Shock resistance |
10 to 150 Hz frequency, 5 G max. (50 m/s2 approx.) in X, Y and Z directions for twenty times each | ||||||
Maximum cable length | 15-pin plug: Max. 50 m 164.042 ft, 9-pin plug: Max. 10 m 32.808 ft (when using RS-232C) / Max. 50 m 164.042 ft (when using RS-422) (by using optional connection cable) (Note 1) |
||||||
Material | Main body: Die-cast aluminum, Scanner window: Thermoplastic resin | ||||||
Accessories | SD3-PS (exclusive 15-pin connector): 1 pc., SD3-RS232 (exclusive 9-pin connector): 1 pc., Mounting screws [M5 (length 20 mm 0.787 in) hexagon-socket-head bolt: 2 pcs., M5 (length 16 mm 0.630 in) hexagon-socket-head bolt: 2 pcs., attached to SD3-PS]:1 set, Simplified instruction manual: 1 copy, Installation CD-ROM (includes detailed instruction manual data): 1 CD |
||||||
Weight | Net weight: 2.1 kg approx., Gross weight: 2.9 kg approx. |
Note 1: | Be careful that a voltage drop may occur depending on the cable length or cable's conductor cross-section area. |
---|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)