【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Wire-Saving Systems > IO-Link Master Unit > Specifications
Model No. | SC-LG2-CEF-P | |||
---|---|---|---|---|
Regulatory compliance | CE Marking (EMC Regulations, RoHS Regulations)、UKCA Marking (EMC Regulations, RoHS Regulations) | |||
Supply voltage | 24 V DC+10 -15 %, Ripple P-P 10 % or less | |||
CC-Link IE Field specifications |
Current consumption | 200 mA or less | ||
Communication method | CC-Link IE Field | |||
Remote station type | Intelligent device station | |||
Network number setting | 1 to 239 (decimal) [1 to EF (hex)] (0 and 240 or more: Error) | |||
Cyclic transmission[Maximum number of link points per station] | RX/RY: Maximum 112 points (112 bits) / Maximum 112 points (112 bits) RWr/RWw: Maximum 132 points (132 words) / Maximum 132 points (132 words) |
|||
Transient transmission | For server function only, message size: 2 kbytes (maximum) | |||
Number of ports | 1000BASE-T Ethernet port (RJ45) × 2 | |||
Station number setting | 1 to 120 (decimal)(0 and 121 or more: Error) | |||
Communication speed | 1 Gbps | |||
Communication cable | Category 5e or higher Ethernet cables that satisfy the 1000BASE-T standard (Double shielded twisted pair cable or straight cable)(Note 1) |
|||
Transmission line type | Line type, star type (line/star mixed type also possible), ring type | |||
Maximum distance between stations |
100 m 328.084 ft | |||
Maximum number of stations that can be connected | 121 (1 master station, 120 slave stations) | |||
Maximum number of stages of cascade connection | 20 | |||
IO-Link specifications |
Current consumption | 150 mA or less (excluding the current consumption of connected IO-Link devices) | ||
Allowable passing current | 3 A or less (Note 2) | |||
Communication method | IO-Link V1.0 / V1.1 | |||
Number of ports | e-CON compliant connector port for IO-Link × 8 | |||
Communication speed | COM1 (4.8 kbps), COM2 (38.4 kbps), COM3 (230.4 kbps) Automatically set by IO-Link device |
|||
Current supplied to device (L+, L-) | Maximum 200 mA per port (Note 2) | |||
Digital I/O (C/Q) (Note 2)(Note 3) |
IO-Link mode | Compliance with the IO-Link standard | ||
SIO mode | During input setting | PNP input (Sink current: Max. 15 mA) | ||
During output setting | Push-pull output (Drive capacity: Max.100 mA) | |||
Digital input (DI) (Note 2)(Note 3) |
PNP input (Sink current: Max. 15 mA) | |||
Communication cable | Unshielded | |||
Maximum cable length | 20 m 65.617 ft | |||
IO-Link connector | e-CON compliant connector (4-pin type)(Note 4) | |||
Environmental resistance |
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ | ||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | |||
Insulation resistance | 20 MΩ or more with 250 V DC megger between all supply terminals connected together and enclosure | |||
Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.03 in double amplitude (10 to 58 Hz), maximum acceleration 49 m/s2, (58 to 150 Hz) in X, Y, and Z directions for two hours each | |||
Shock resistance | 98 m/s2 (10 G approx.) in X, Y, and Z directions three times each | |||
Grounding method | Power supply connector is equipped with a frame ground (F.G.) RJ45 connector shield: Directly connected to ground terminal Internal circuit: C coupling, Casing: Floating type |
|||
Limit to the number of flash memory save operations | 100,000 (Note 5) | |||
Material | Case: Polycarbonate | |||
Weight | Net weight: 210 g approx., Gross weight: 270 g approx. | |||
Accessory | Power supply connector: 1 pc. |
Notes:
1) | Use a cable recommended by CC-Link Partner Association. |
---|---|
2) | Take care that the total consumption current of connected devices and the unit on
the IO-Link side does not exceed the allowable passing current. Power to devices (L+, L-), digital I/O (C/Q), and digital input (DI) are supplied from IO-Link (+V, -V) on the power supply connector. |
3) | Operation settings for digital I/O (C/Q) and digital input (DI) must be configured with CC-Link IE Field. If operation settings are not configured, they will not operate. |
4) | For the connectors for connecting devices to this product, purchase simple wire-press connector (e-CON) CN-EP2 (5 pcs. set) or CN-EP3 (5 pcs. set) or the recommended product. |
5) | This product saves settings in internal flash memory. |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)