【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Sensors
> Wire-Saving Systems
> Sensor Block for Simple Wiring SL-BMW/BW(Discontinued Products)
> Specifications
Sensor Block for Simple Wiring SL-BMW/BW (Discontinued Products)
|
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
Specifications
Sensor blocks
| Designation | Plug-in unit sensor main block | Plug-in unit extension block | Snap-connector extension block | Plug-in unit 4-channel sensor block |
|---|---|---|---|---|
| Model No. | SL-BMW | SL-BX | SL-BXJ (Note 2) |
SL-BW |
| Supply voltage | Depends on used input device | - | Supplied from sensor main block | Depends on used input device |
| Current consumption | Depends on the number and characteristics of the connected input devices (Note 3) |
6 mA/channel (excluding connected users' devices) |
Depends on the number and characteristics of the connected input devices (Note 3) |
|
| Input channel No. | 4 inputs (Max. 16 inputs with extension blocks) (Note 4) |
4 inputs (Note 5) | ||
| Ambient temperature | 0 to +55 ℃ +32 to +131 ℉ (No dew condensation allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ |
|||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||
| Material | Enclosure: Heat-resistant ABS, Connector: PBT, Case cover (SL-BXJ only): Polycarbonate |
|||
| Cable | 0.3 mm2 2-core cabtyre cable, 2 m 6.562 ft long | - | 0.2 mm2 6-core cabtyre cable, 2 m 6.562 ft long | |
| Weight | Net weight: 130 g approx. | Net weight: 30 g approx. | Net weight: 60 g approx. | Net weight: 130 g approx. |
| Accessories | Extension connector cap: 1 pc. Plug-in connector cap: 1 set (Note 6) |
- | Input designation label set: 1 sheet Socket seal: 8 sheets |
Plug-in connector cap: 1 set (Note 6) |
Notes :
| 1) | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉. |
|---|---|
| 2) | PNP output device cannot be connected. |
| 3) | Neither SL-BMW, SL-BX or SL-BW consumes current by itself. |
| 4) | Maximum 15 inputs are allowed if the self-diagnosis output is used. |
| 5) | Maximum 3 inputs are allowed if the self-diagnosis output is used. |
| 6) | Use the extension connector cap and the plug-in connector cap to cover each exposed connector. Three plug-in connector caps are joined together. If two, or less, are to be used, cut to separate them. |
Extension connector cap
|
Plug-in connector cap
|
Plug-in units
| Designation | Amplifi er-separated photoelectric sensor | Input terminal unit |
|---|---|---|
| Model No. | SU-7J | SL-TJ1 |
| Supply voltage | 12 to 24 V DC ± 10 % (24 V DC supplied from sensor block) |
24 V DC ± 10 % (24 V DC supplied from sensor block) |
| Current consumption | 35 mA or less | 0 mA (7.5 mA or less when the indicator lights up, excluding connected users' device) |
| Output | Sensing output and self-diagnosis output | - |
| Applicable sensor heads | SH series | NPN output transistor, DC 2-wire type or relay output sensor, switch, etc. (Signal conditions depend on the input conditions of the PLC connected to the sensor block.) |
| Sensing range | Thru-beam type: 2 m 6.562 ft with SH-33R Refl ective type: 100 mm 3.937 in with SH-32R |
- |
| Functions | Automatic sensitivity setting, Sensitivity shift Stability margin indication, Interference prevention 0 to 5 sec. variable ON and OFF-delay timers |
Indicators (Red LED: lights up when the sensor input is ON Yellow LED: lights up when the self-diagnosis input is ON.) |
| Connecting method | Connector | Connector (Screw-on-terminal connection of users' input device) |
| Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (Note 2), Storage: -20 to +70 ℃ -4 to +158 ℉ | -10 to +50 ℃ +14 to +122 ℉ (Note 2), Storage: -20 to +70 ℃ -4 to +158 ℉ |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |
| Material | Enclosure: Heat-resistant ABS, Cover: Polycarbonate, Cable lock lever: PPS | Enclosure: Heat-resistant ABS, Cover: Polycarbonate |
| Weight | Net weight: 65 g approx. | Net weight: 20 g approx. |
| Accessories | MS-DIN-2 (Amplifier mounting bracket): 1 pc. Mode indication label: 1 sheet |
- |
Notes :
| 1) | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉ (SU-7J: +23 ℃ +73.4 ℉). |
|---|---|
| 2) | Please take care that the rated ambient temperature of the sensor block is 0 to +55 ℃ +32 to +131 ℉ |
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT US
BY EMAIL
BY EMAIL
Please click your area to select country or region
BY PHONE
- U.S.A.
- +1-800-344-2112
- Europe
- +49-89-45354-1000
- China
- +86-10-59255988
- Singapore
- +65-6299-9181
Related Information
Service & Support
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
