Data Logger Light (DLL) Firmware Ver.2.61

Information you need to know before using the software (Essential reading)

About Data Logger Light (DLL) Firmware Ver.2.61

The latest firmware for the Data Logger Light is available.
Configurator WD Ver1.50 or higher or Configurator DL Ver2.40 or higher should be installed to use the latest firmware.
If you use the old version, upgrade it from the software download page.

Return to top

How to Install

1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.

*When you already have indicated the download destination, the file will be downloaded automatically.

Title Language Version File size Update
dllver2_61verup.bin EN 2.61 622.4KB April 1, 2021

2.When the download is finished, double-click the file to begin the installation process. Follow one of the two procedures listed below.

　

(Procedure A)

  • 1.Connect a PC via USB or LAN with Data Logger Light which will be the object of the version up and run the Configurator DL.
  • 2.Operation mode should be set to "STOP" with the switch on the main unit or vir Configurator DL.
  • 3.Click icon of "Manual-setups" in menu and choose "Online" by using tab. Click "Update farmware" in menu.
  • 4.Then select the firmware file.
  • 5.Select using USB port or using LAN port with the screen of selection communication I/F, click "Execute" button.
    The latest firmware is installed. Now the installation is completed.

(Procedure B)

  • 1.Download Control Configurator WD IP address Search Tool [ConfigWD.exe] and start the application.
  • 2.Connect the Data Logger Light to LAN and a PC, and search with the application downloaded in the step 1.
  • 3.Operation mode should be set to "STOP" by switch on main unit or Configurator DL.
  • 4.Choose one or several searched Data Logger Light which need to version up and go to "Editing → Firmware update" of the menu.
  • 5.Then select the firmware file.
  • 6.The software is installed several second later. Now the installation is completed.

3.After completing the installation, reboot the Data Logger Light.

　
 

Return to top