Terminal GTWIN Ver.3 difference file

Information you need to know before using the software (Essential reading)

About Terminal GTWIN Ver.3 difference file

The Terminal GTWIN Ver.3.43 difference file is used to upgrade Terminal GTWIN Ver.3.0 or later to Ver.3.43. This file does not work on its own.

To install this software, Terminal GTWIN Ver.3.0 or later must already be installed.

Return to top

Caution

Be aware of the following points listed below.
The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd. By using this software it is assumed that you agree to "Conditions of Use" presented below.

Conditions of Use

  • Panasonic Industrial Devices SUNX does not warrant anything regarding the use of this software.
  • Panasonic Industrial Devices SUNX will not assume responsibility of any sort for direct, indirect, repercussive, resulting or special damage that results from using this software or from the operation of the software itself.
  • Panasonic Industrial Devices SUNX does not restrict the use, copying or distribution of this software.
    However, when copying or distributing, Panasonic Industrial Devices SUNX prohibits the procurement of fees other than the cost of media, and prohibits the applying of restrictions in use of the software.

System Requirements

Make sure that the computer on which you intend to run the software meets the minimum specifications listed below.

OS Windows Vista® / Windows®7 / Windows®8 / Windows®8.1 / Windows®10
Required hard disk space 800MB or more
Recommended CPU 1GHz or better
Recommended system RAM 1GB or more
Recommended display resolution 1240 x 768 or more
Recommended color depth 65536 colors or more

Windows(64-bit edition)

64-bit edition of Windows® is supported for Windows7, Windows8, Windows8.1 and Windows10.
Use 32-bit edition of Windows Vista.

PC's specifications

The above usable environment is minimum requirements. Use a PC of higher specifications than that recommended by each OS.

How to Install

1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.

*When you already have indicated the download destination, the file will be downloaded automatically.

Title Language Version File size Update
gtwin_spv3430e.exe EN 3.43 147.8MB August 5, 2019

2.When the download is finished, double-click the file to unzip.

 

3.Double-click the file to begin the installation process.

 

4.Installation is performed.

  • When the message, ''Cannot install, because GTWIN is already exist on this computer. Uninstall it and try again'', is not appeared, proceed to the step5.
  • When the message, ''Cannot install, because GTWIN is already exist on this computer. Uninstall it and try again'', is appeared. Uninstall the Terminal GTWIN in the "addition and deletion of application" in the control panel.
    (If you perform uninstallation without following the installation procedure (step2), version upgrade cannot be performed. So please be sure to follow the installation procedure.)
 

5.Double-click the file to begin the installation process.

 

6.After completing the installation, reboot the computer.

When you connect the computer and the GT with USB cable, please install the USB driver.

1. Go to "Device Manager", select "Panasonic GT" and right click "Update Driver Software".

2. Select "Browse my computer for driver software".

3. Select the folder where "GTWIN_USB" is stored. Default location will be "C:\Program Files\Panasonic-ID SUNX Terminal\GTWIN_V3\GTWIN_USB".

4. The USB driver install will start. Follow the screen prompts displayed by the installation program.

 
 

Return to top