EDS File for Laser Marker's EtherNet/IP™ Unit LP-ANW10

Download the setup files (.zip) for EtherNet/IP unit LP-ANW10 of the laser marker.
The zip file contains the following files:
- EDS file: LP-Device.EDS
- EtherNet/IP Communication Guide: LP-RH_RF_RV_ZV_EtherNetIP_CommunicationGuide.pdf

This EDS file can be used with the following laser marker models that has EtherNet/IP unit LP-ANW10 attached.
- LP-RH series
- LP-RF series ^*1
- LP-RV series ^*1
- LP-ZV series
*1: Produced in September 2019 or later and controller version 1.6.0 or higher.

Be aware of the following points listed below.
This software is freeware. The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd. By using this software it is assumed that you agree to "Conditions of Use" presented below.

• Panasonic Industrial Devices SUNX does not warrant anything regarding the use of this software.
• Panasonic Industrial Devices SUNX will not assume responsibility of any sort for direct, indirect, repercussive, resulting or special damage that results from using this software or from the operation of the software itself.
• Panasonic Industrial Devices SUNX does not restrict the use, copying or distribution of this software.
  However, when copying or distributing, Panasonic Industrial Devices SUNX prohibits the procurement of fees other than the cost of media, and prohibits the applying of restrictions in use of the software.

1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.

*When you already have indicated the download destination, the file will be downloaded automatically.

	Title	Language	Version	File size	Update
	lp-anw10_setup_ethernetip.zip	EN	1.0.4	2.7MB	November 1, 2023

2.Decompress the downloaded file.

3.Install the EDS file to your PLC by following the instructions of the PLC.