PC setting software for LP-GS/RC/RF/RV series Laser Marker Smart Utility Ver.1.6.1

Information you need to know before using the software (Essential reading)

About PC setting software for LP-GS/RC/RF/RV series Laser Marker Smart Utility Ver.1.6.1

With this software you can install Laser Marker Smart Utility of the earlier version 1.6.1. If you want to use the software of the older design, install this version.

Features

Create and edit the marking data (Online/offline)
Operate and control the laser marker (Online)
Monitor the running status of the laser marker (Online)

Restriction Content

To use this software, you need to purchase the laser marking system of LP-GS/RC/RF/RV series.
For details of this software, please refer to the help manual attached to this software.
Note that if you have already installed Laser Marker NAVI Smart (Laser Marker Smart Utility) Ver2.0.0 or later, you cannot install the earlier version to the same PC.

Correspondence table

Laser Marker NAVI smart	Applicable LP-GS/RC/RF/RV
Ver.1.6.1	Ver.1.0.0 - Ver.2.x.x

Note : If your controller version is Ver. 1.0.0–Ver. 1.6.0, some functions on Laser Marker NAVI smart are not available.

Return to top

Caution

Be aware of the following points listed below.
The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd. By using this software it is assumed that you agree to "Conditions of Use" presented below.

Conditions of Use

Panasonic Industrial Devices SUNX does not warrant anything regarding the use of this software.
Panasonic Industrial Devices SUNX will not assume responsibility of any sort for direct, indirect, repercussive, resulting or special damage that results from using this software or from the operation of the software itself.

System Requirements

Make sure that the computer on which you intend to run the software meets the minimum specifications listed below.

Item	Installation requirements
OS ^*1	Microsoft® Windows® 10 Pro 32bit, 64bit Microsoft® Windows® 8.1 Pro 32bit, 64bit Microsoft® Windows® 7 Professional SP1 32bit, 64bit
Free area on hard disk	512MB or more
CD-ROM drive ^*2	1 set or more
USB port	USB 2.0
LAN ^*3	10BASE-T or 100BASE-TX
Bluetooth® ^*4	Version 2.0 / 2.1 / 3.0
Memory capacity	2GB or more
CPU	Equivalent to or higher than Intel Core i3
Display resolution	1366 x 768 pixels or above
Display size	10.6 inch or above
Others	Pointing device such as a mouse, character input device such as a keyboard, or a touch interface^*5

*1	OS versions of which Microsoft has ended support are excluded. The CPU type, memory capacity, hard-disk space, and display function required to operate each OS should be provided in accordance with the recommendation of Microsoft. Laser Marker NAVI smart can be installed in English, Simplified Chinese, German or Japanese. It is preferred that the OS language corresponds to the installation language. If the OS language is other than these supported languages, install Laser Marker NAVI smart in English.

OS versions of which Microsoft has ended support are excluded. The CPU type, memory capacity, hard-disk space, and display function required to operate each OS should be provided in accordance with the recommendation of Microsoft. Laser Marker NAVI smart can be installed in English, Simplified Chinese, German or Japanese. It is preferred that the OS language corresponds to the installation language. If the OS language is other than these supported languages, install Laser Marker NAVI smart in English.

*2	To install "Laser Marker Smart Utility" on a PC without a CD-ROM drive, copy all CD-ROM data to the PC using external storage media such as a USB flash drive before installation.

*3	Specifications to be observed for Ethernet connection.

*4	Specifications to be observed for wireless Bluetooth connection. Bluetooth is available with the following models. • LP-GS051 / LP-GS051-E / LP-GS051-L / LP-GS051-LE • LP-GS052 / LP-GS052-E

*5	To use a touch interface, Windows 8.1 Pro or Windows 10 Pro is required.

How to Install

1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.

*When you already have indicated the download destination, the file will be downloaded automatically.

	Title	Language	Version	File size	Update
	lasermarker_smartutility_v0161.zip	EN	1.6.1	132.6MB	November 16, 2020

2.Decompress the downloaded file.

3.Double-click on “setup.exe” to start the installation.

*	For more information, refer to the manual which can be downloaded from our Web site. Registration for Panasonic Automation Controls Web Members is required for download.

	Title	Language	File size	Update
	Laser Marker NAVI smart 操作マニュアル【旧画面デザイン版対応】対応バージョン：コントローラVer. 1.6.0以上、Laser Marker NAVI smart Ver. 1.6.0以上	JP	11.3MB	July 20, 2020

	Title	Language	File size	Update
	Laser Marker NAVI smart Operation Manual [For the older design] Controller Ver. 1.6.0 and more, Laser Marker NAVI smart Ver. 1.6.0 and more	EN	10.7MB	July 20, 2020

	Title	Language	File size	Update
	Laser Marker NAVI smart 操作手册 [支持旧画面设计版] 适用版本：控制器Ver. 1.6.0以上, Laser Marker NAVI smart Ver. 1.6.0以上	CN-Simplified	10.8MB	July 20, 2020