Information you need to know before using the software (Essential reading)
The Control FPWIN GR Ver.2.96 difference file is used to upgrade Ver.2.0 or later to Ver.2.96.
This file does not work on its own.
To install this software, Control FPWIN GR Ver.2.0 or later must already be installed.
Users who are using Control FPWIN GR Ver.1 should obtain the upgrade version.
Be aware of the following points listed below.
The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd. By using this software it is assumed that you agree to "Conditions of Use" presented below.
Make sure that the computer on which you intend to run the software meets the minimum specifications listed below.
|OS||Windows® 7 SP1 or later *1 / Windows®8 *1/ Windows®8.1 *1/ Windows®10 *1|
|Available hard disk space||More than 40 MB|
|Recommended CPU||Pentium 100 MHz or better|
|Recommended system RAM||More than 64 MB (depends on OS)|
|Recommended display resolution||800*600 or more|
|Recommended color depth||High color (16 bits) or better|
|Applicable PLCs||All FP series (excluding FP7and FP0H) * Compatible with FP-XH C14/C30/C60|
|*1||32 bit edition / 64 bit edition|
*When you already have indicated the download destination, the file will be downloaded automatically.
|fpwin_gr_spv296e.exe||EN||2.96||125.3MB||November 1, 2021|
|fpwin_gr_spv296k.exe||KR||2.96||125.3MB||November 1, 2021|
|*||When the message, ''First, please uninstall ''FPWIN GR 2'' and install again.'', is appeared. Uninstall the FPWIN GR 2 in the "addition and deletion of application" in the control panel.Perform uninstallation to select "FPWIN GR 2". When uninstallation is completed, it is ready to be installed.
Double click the downloaded file again, and follow the screen prompts displayed by the installation program.
(If you perform uninstallation without following the installation procedure (step3), version upgrade cannot be performed. So please be sure to follow the installation procedure.)