Control FPWIN Pro Ver.6.31 difference file

Information you need to know before using the software (Essential reading)

About Control FPWIN Pro Ver.6.31 difference file

The Control FPWIN Pro Ver.6.31 difference file is used to upgrade Ver.6.0.

This file does not work on its own.
To install this software, Control FPWIN Pro Ver.6.0 must already be installed.

Version-Up Information (Ver.6.1 to Ver. 6.31)

  • Supported the FP2SH 32K.
  • Supported the FP-X0.
  • Variable selection dialog and Function selection dialog was integrated.
  • Cleaned up and improved menus, context menus and toolbars.
  • Comments of variables, addresses and functions came to be shown in the LD editor.
  • Improved import of FPWIN GR files.
  • Supported new data types. (UINT, UDINT, DATE_AND_TIME, DATE, TIME_OF_DAY)
  • Maximum string length was extended from 255 to 32767 characters.
  • The project security level adjusted via "Change Security Level" came to be reset to the level 0 after closing the project.
  • Fixed the problem that ST editor’s programming window was cleared in some cases while executing the "Find text" command.
  • Fixed the problem that the message "Current code is out of date” was output erroneously when using MCU settings after transferring a project to the PLC.
  • Regarding more detailed information, please check the help file.

Version-Up Information (Ver.6.0 to Ver. 6.1)

  • Supports FP0R.

Return to top

Caution

Be aware of the following points listed below.
The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd. By using this software it is assumed that you agree to "Conditions of Use" presented below.

Conditions of Use

  • Panasonic Industrial Devices SUNX does not warrant anything regarding the use of this software.
  • Panasonic Industrial Devices SUNX will not assume responsibility of any sort for direct, indirect, repercussive, resulting or special damage that results from using this software or from the operation of the software itself.
  • Panasonic Industrial Devices SUNX does not restrict the use, copying or distribution of this software.
    However, when copying or distributing, Panasonic Industrial Devices SUNX prohibits the procurement of fees other than the cost of media, and prohibits the applying of restrictions in use of the software.

System Requirements

Make sure that the computer on which you intend to run the software meets the minimum specifications listed below.

OS Windows 2000 / XP / Vista / 7 / 8*1 / 8.1*1
Available hard disk space More than 120 MB
Recommended CPU Pentium III 700 MHz or better
Recommended system RAM More than 256 MB (depends on OS)
Recommended display resolution 1024*768 or more
Recommended color depth High color (16 bits) or better
Applicable PLCs All FP series(without FP7)

*1 : 32bit only.

How to Install

1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.

*When you already have indicated the download destination, the file will be downloaded automatically.

Title Language Version File size Update
fpwin_pro_spv6310e_OnlineHelp.exe EN 6.31 30.3MB September 30, 2011
fpwin_pro_spv6310.exe EN 6.31 25.8MB September 30, 2011

*Without FPWIN Pro installed in your PC, "on-line help" can not be installed.
Also, installing "differential file" does not update the "on-line help" contents.
Please download "on-line help" for your best use.

2.When the download is finished, double-click the file to begin the installation process.

 

3.After completing the installation, reboot the computer.

 
 

Return to top