Motion Controller GM1 Firmware Version-up file Ver.1.4.0.1
Information you need to know before using the software (Essential reading)
About Motion Controller GM1 Firmware Version-up file Ver.1.4.0.1
Motion Controller GM1 Firmware Version-up file Ver1.4.0.1 is file to version-up GM1 Firmware to Ver1.4.0.1.
Please version-up following the procedure in "How to Install".
Caution
Be aware of the following points listed below.
This product incorporates the following software:
(1)The software developed independently by or for Panasonic Industry Co., Ltd. ("Panasonic Industry")
(2)The software owned by third party and licensed to Panasonic Holdings Corporation.
(3)Software licensed under GNU General Public License Version 2.0 (GPL V2.0)
(4)Software licensed under GNU Lesser General Public License Version 2.0 (LGPL V2.0) or Version 2.1 (LGPL V2.1)
(5)Open source software licensed on conditions other than those of GPL V2.0, LGPL V2.0, or LGPL V2.1
Please refer to the copyright notice of those individuals at following license terms.
Conditions of Use
- Panasonic Industry does not warrant anything regarding the use of this software.
- Panasonic Industry will not assume responsibility of any sort for direct, indirect, repercussive, resulting or special damage that results from using this software or from the operation of the software itself.
- Panasonic Industry does not restrict the use, copying or distribution of this software.
- However, when copying or distributing, Panasonic Industry prohibits the procurement of fees other than the cost of media, and prohibits the applying of restrictions in use of the software.
How to Install
1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.
*When you already have indicated the download destination, the file will be downloaded automatically.
 |
Title | Language | Version | File size | Update |
|---|---|---|---|---|---|
| gm1controller_v1401.zip | EN | 1.4.0.1 | 71.2MB | April 15, 2024 |
2.Decompress the downloaded file.
Firmware Version-up files(.hex files) are decompressed.
3.Create a project.
Starting up GM Programmer, preparing project file to connct Motion Controller GM1 before version-up.
4.Execute the Network Scan function and connect to the GM1.
5.Select Online>Unit Version Upgrade from the menu bar,
The "Unit Version Upgrade" dialog box appears.
6.Save .hex files to path for version update file
Administrator privileges is required to save files to the default path.
Click the [Select Path] button and specify a folder where .hex files are saved if you do not have administrator privileges.
7.Execute Firmware Version-up.
Click [OK] button after selecting the version in the Update Version column to proceed firmware version-up.
For details on how to version-up firmware, refer to the GM1 Series User’s Manual (Operation).
