Control FPWIN GR Ver.2.80 trial version

Information you need to know before using the software (Essential reading)

About Control FPWIN GR Ver.2.80 trial version

The trial version of Control FPWIN GR differs from the commercial version in the particulars listed below.

1.Using the trial version, the number of program steps that can be created with the application or uploaded from the PLC is limited to only 200.

2.The following items are not included in the trial version.

  • PLC programming manual
  • Modem connection
  • MEWNET-H setting

Except for the differences listed above, you may try out, with the trial version, all the same functions as the commercial version.

Return to top


Be aware of the following points listed below.

  • The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd. By using this software it is assumed that you agree to "Conditions of Use" presented below.
  • The trial version of Control FPWIN GR is provided so that you can try out the functions of the commercial version.
    Be aware that no support is provided and no warranty whatsoever is offered to users of the trial version.
    (The help menu provides tips for program operations.)
  • Do not use the trial version of Control FPWIN GR in the actual operation of devices. Furthermore, If you ignore this warning and the program that you have provided using the trial version of Control FPWIN GR causes the equipment to malfunction, this company accepts absolutely no responsibility for any loss or damage incurred.
    If you want to use Control FPWIN GR to provide programs for practical use in equipment, please purchase the commercial version of Control FPWIN GR.

Conditions of Use

  • Panasonic Industrial Devices SUNX does not warrant anything regarding the use of this software.
  • Panasonic Industrial Devices SUNX will not assume responsibility of any sort for direct, indirect, repercussive, resulting or special damage that results from using this software or from the operation of the software itself.

System Requirements

Make sure that the computer on which you intend to run the software meets the minimum specifications listed below.

OS Windows 98 / Me/ 2000 / XP
Available hard disk space More than 40 MB
Recommended CPU Pentium 100 MHz or better
Recommended system RAM More than 64 MB (depends on OS)
Recommended display resolution 800*600 or more
Recommended color depth High color (16 bits) or better
Applicable PLC All FP series (without FP7)

How to Install

1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.

*When you already have indicated the download destination, the file will be downloaded automatically.

Title Language Version File size Update
fpwin_gr_demov280e.exe EN 2.80 20.1MB May 11, 2009

2.When the download is finished, double-click the file to begin the installation process.

  • During installation, be sure to read the License Agreement. Users who continue with the installation are regarded as assenting to the conditions of use in the License Agreement.
  • There is no need to input a serial number during the installation of the trial version.
  • When installing in WindowsXP or WindowsVista, the following message is displayed. "The software you are installing has not passed Windows Logo testing....". Please select [Continue Anyway] button.
  • When Ver.2.7* or lower demo version is detected, the message, "Please uninstall FPWIN GR 2 Demo", is appeared. Click on the "addition and deletion of application" in the control panel. Perform uninstallation to select "FPWIN GR 2 Demo". When uninstallation is completed, FPWIN GR Ver.2.80 Demo version is ready to be installed.

3.After completing the installation, reboot the computer.


Return to top