Information you need to know before using the software (Essential reading)
You can use KT Monitor to edit the data of KT4H temperature controller, save files, perform monitoring of temperature data, and to monitor and save log files of designated values. USB driver for the tool cable (AKT4H820) that connects KT Monitor to the KT4H temperature controller are also included in the same download file. (USB driver: ver.1.09.05 for 98/Me and ver.1.00.2154 for XP/2000)
Be aware of the following points listed below.
This software is freeware. The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd. By using this software it is assumed that you agree to "Conditions of Use" presented below.
Make sure that the computer on which you intend to run the software meets the minimum specifications listed below.
|OS||Windows98/ Me/ 2000/ XP Home/XP Professional/Vista Home 32bit(*1)/
Vista Professional 32bit(*1)/7 Home 32bit,64bit(*1)/7 Professional 32bit,64bit(*1)/8 64bit(*1)/8.1 64bit(*1)
|Available hard disk space||more than 100MB|
|Recommended CPU||Pentium100MHz or better|
|Recommended system RAM||more than 64MB (depends on OS)|
|Recommended display resolution||1024 × 768 or more|
|Applicable models||KT4H Temperature Controllers|
|*1||To read the help file, the Winhlp32.exe program should be downloaded from the Microsoft URL.|
*When you already have indicated the download destination, the file will be downloaded automatically.
|ktmonitor_freev120e.exe||EN||1.20||20.2MB||June 20, 2013|
|*||For details about KT Monitor, refer to the help menu in KT Monitor.|
|*||Before using KT Monitor for the first time, install the USB drier for the tool cable. For installation instructions, refer to "Setup.txt" in the "USB_driver" folder.|
|*||For more information about KT4H temperature controller, refer to the "Temperature Controllers Use's Manual" available from the manual download page.|