[Announcement of System Maintenance]
Please be informed that Automation Controls Website will be not available on Sunday, June 4th, 2023, from 11:00 to 12:00 (JST).

PV500/PV500V2 Firmware Ver. 2.52

Information you need to know before using the software (Essential reading)

About PV500/PV500V2 Firmware Ver. 2.52

You can download the latest version of the firmware for PV500/PV500V2(or PV500) IMAGECHCKER from this page. You need to prepare an SD memory card.

[Target models]

Two-camera type PV500, Ver. 1.00 or later
Four-camera type PV500, Ver. 1.00 or later

Detailed Version-Up Information

Return to top

Caution

You may not reverse-engineer, decompile, or disassemble this software.
The setting data is upwardly compatible with the upgrade version, whereas downward compatibility has not been taken into consideration. It is recommended that you save the setting data on an SD memory card before upgrading with this software.

Be aware of the following points listed below.
This product incorporates the following software:

(1)	The software developed independently by or for Panasonic Industrial Devices SUNX Co., Ltd.
(2)	The software owned by third party and licensed to Panasonic Industrial Devices SUNX Co., Ltd.
(3)	Open sourced software licensed under license terms

>>Click here to download copyright and license information in English

How to Install

1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.

*When you already have indicated the download destination, the file will be downloaded automatically.

	Title	Language	Version	File size	Update
	firm2520.zip	EN	2.52	8.4MB	March 28, 2018

2.Copy the downloaded file to the specified location.

Decompress the downloaded file and copy it and folder file 'Panasonic MEW Vision' to the SD memory card together.

3.Execute the upgrade process.

1.Stop the operation of PV500, and insert the SD memory card.

2.Go to the “Settings” screen, select Tool, Update, and then Firmware, and select the file of target version.

3.The message, “Are you sure you want to update the firmware?”, will be displayed. Click YES to start the upgrade process.

*	NEVER power off PV500 during the data transfer.