[Announcement of System Maintenance]
Please be informed that Automation Controls Website will be not available on Sunday, June 4th, 2023, from 11:00 to 12:00 (JST).
PVWIN Ver.2.50 for setting PV500/PV500V2
Information you need to know before using the software (Essential reading)
About PVWIN Ver.2.50 for setting PV500/PV500V2
PVWIN for setting PV500/PV500V2(or PV500) supports the settings and simulation of PV500 on PC.
Features
- 1.PVWIN is able to set up the environment parameter and the inspection parameter on PC.
( But PVWIN is not able to set up Camera adjustment. ) - 2.PVWIN is easily able to set up the adjustment of the inspection parameter, because it is able to the inspection simulation on PC.
- 3.PVWIN is able to run the inspection simulation all image that Image Reciever takes.
Restriction Content
- 1.PVWIN is able to download after buying PV500
- 2.PVWIN is able to read the setting data of below Ver.1.30 of PV500 by SD card.
But below Ver.1.30 of PV500 is not able to read the setting data that PVWIN updates. - 3.When you save the setting data of old version of PV500 by using new version of PVWIN, there is a case that can't save it if you are using new function.
At the time, you can save it by deleting the setting data of new function. - 4.Please use 32 bits or more in the Full Color of PC.
If you use PVWIN under 32 bits, the result that the inspection result differs with PV500 will occur. - 5.Please refer the help file about the using method of PVWIN.
Correspondence table of PV500
| PVWIN | PV500 | Applicable PV500 |
|---|---|---|
| Ver.2.50 | Ver.2.52 Ver.2.51 Ver.2.50 |
Ver.2.00 - 2.52 Ver.1.30 - 1.60 |
| Ver.2.41 | Ver.2.41 | Ver.2.00 - 2.41 Ver.1.30 - 1.60 |
| Ver.2.40 | Ver.2.40 | Ver.2.00 - 2.40 Ver.1.30 - 1.60 |
| Ver.2.31 | Ver.2.31 | Ver.2.00 - 2.31 Ver.1.30 - 1.60 |
| Ver.2.30 | Ver.2.30 | Ver.2.00 - 2.30 Ver.1.30 - 1.60 |
| Ver.2.23 | Ver.2.23 | Ver.2.00 - 2.23 Ver.1.30 - 1.60 |
| Ver.2.20 | Ver.2.20 | Ver.2.00 - 2.20 Ver.1.30 - 1.60 |
| Ver.2.10 | Ver.2.10 | Ver.2.00 - 2.10 Ver.1.30 - 1.60 |
| Ver.2.01 | Ver.2.01 | Ver.2.00 - 2.01 Ver.1.30 - 1.60 |
| Ver.2.00 | Ver.2.00 | Ver.2.00 Ver.1.30 - 1.60 |
| Ver.1.41 | Ver.1.60 | Ver.1.30 - 1.60 |
| Ver.1.40 | Ver.1.60 | Ver.1.30 - 1.60 |
| Ver.1.30 | Ver.1.50 Ver.1.51 |
Ver.1.30 - 1.51 |
| Ver.1.24 | Ver.1.43 | Ver.1.30 - 1.43 |
| Ver.1.23 | Ver.1.42 | Ver.1.30 - 1.42 |
| Ver.1.22 | Ver.1.42 | Ver.1.30 - 1.42 |
| Ver.1.21 | Ver.1.41 | Ver.1.30 - 1.42 |
| Ver.1.20 | Ver.1.41 | Ver.1.30 - 1.42 |
| Ver.1.10 | Ver.1.40 | Ver.1.30 - 1.42 |
| Ver.1.02 | Ver.1.30 | Ver.1.30 |
*The communication with PVWIN through the Ethernet corresponds from PV500 Ver.1.40.
Caution
This software is freeware.
Be aware of the following points listed below.
This product incorporates the following software:
| (1) | The software developed independently by or for Panasonic Industrial Devices SUNX Co., Ltd. |
|---|---|
| (2) | The software owned by third party and licensed to Panasonic Industrial Devices SUNX Co., Ltd. |
| (3) | Open sourced software licensed under license terms |
>>Click here to download copyright and license information in English
By using this software it is assumed that you agree to "Conditions of Use" presented below.
Conditions of Use
- Panasonic Industrial Devices SUNX does not warrant anything regarding the use of this software.
- Panasonic Industrial Devices SUNX will not assume responsibility of any sort for direct, indirect, repercussive, resulting or special damage that results from using this software or from the operation of the software itself.
- Panasonic Industrial Devices SUNX does not restrict the use, copying or distribution of this software.
However, when copying or distributing, Panasonic Industrial Devices SUNX prohibits the procurement of fees other than the cost of media, and prohibits the applying of restrictions in use of the software.
System Requirements
Make sure that the computer on which you intend to run the software meets the minimum specifications listed below.
| PC | IBM PC/ AT |
|---|---|
| OS *1 | Windows XP/ Vista / 7 *2 / 8 *2 / 8.1 *2 |
| Recommended CPU | PentiumIII 700 MHz or better |
| Recommended system RAM | More than 512 MB (depends on OS) |
| Available hard disk space | More than 120 MB |
| Recommended color depth | Full colors (32 bits) or more |
| Recommended display resolution | 1024*768 or more |
| Communication interface | USB 2.0, TCP/IP Ethernet (1G bps compatible) |
| Applicable IPD | PV500 Ver.1.30 or later (Ver.1.40 or later when Ethernet) |
| *1 | OS except Windows 7, 8 and 8.1 supports 32 bits type only. |
|---|
| *2 | Please refer USB Install manual, when you use PVWIN on Windows 7, 8 or 8.1. |
|---|
How to Install
1.Click on the download button.
(48.7MB)
2.Indicate the download destination.
When you have indicated the download destination, click on the download button.
The file [pvwin_v250.exe] indicated will be downloaded.
3.When the download is finished, double-click the file to begin the installation process.
