【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Static Control Devices > Static Control Devices > Compact Fan Type Ionizer ER-Q(Discontinued Products) > Specifications

Compact Fan Type Ionizer ER-Q (Discontinued Products)

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

	September 29, 2023

Discontinued Products
Information

Specifications

Dimensions

Circuit/ Wiring

Charge removal characteristics

Cautions For Use

Specifications

Type		Compact fan type
Model No.		ER-Q
CE marking directive compliance		EMC Directive, RoHS Directive
Charge removal time (±1,000 V → ±100 V)		1.5 sec. approx. (Note 2)
Ion balance		±10 V or less (Note 2)
Power supply voltage		24 V DC ±10%
Power consumption		200 mA or less
Discharge method		High-frequency AC method
Discharge output voltage		±2 kV approx.
Max. fan speed		6.4 m/s (Note 2)
Max. fan volume		0.2 m3/min.
Output(CHECK, ALARM)		NPN transistor / open collector • Max sink current: 50 mA • Applied voltage: 30 V DC or less (between output terminal and 0 V) • Residual voltage: 1 V or less (at 50 mA sink current)
	Output operation	Check: On when discharge check (Note 3) detected Off at all other times Error: Off when discharge error or fan error (Note 3) detected On at all other times
	Short-circuit protection	Incorporated
Indicators		Discharge (DSC): Green LED, Alarm (ALARM): Red LED
Ozone generation amount		0.02 ppm or less (Note 2)
Ambient temperature		0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: –10 to +65 ℃ +14 to +149 ℉
Ambient humidity		35 to 65% RH (No dew condensation allowed), Storage: 35 to 65% RH
Vibration resistance		10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Grounding method		C (capacitor) grounding
Material		Enclosure: PBT, Discharge needle: Tungsten
Weight		Net weight: 110 g approx.
Accessory		Connector for wiring: 1 set [Manufactured by Molex: Housing (5557-08P), Terminal (5556T)]

Notes:

1)	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20℃ +68℉.
2)	Typical value at 100 mm 3.937 in from directly in front of air outlet, fan speed MAX., with no filter installed.
3)	Discharge check: Drop in discharging status detected. Discharge error: Abnormal discharge detected. Fan error: Fan operating problem detected.