AUTOMATION
CONTROLS

Search
Discontinued
Products



AFP7CPS21 | FP7

  • Print This Page

FP7

*Photo may vary from actual product.



  • Discontinued
  • Last time buyMarch 31, 2023
Product Number AFP7CPS21
Part Number AFP7CPS21
Product FP7 CPU units
Product name FP7
  • Substitute FP7
  • Sub Prod No. AFP7CPS2R
  • Sub Part No. AFP7CPS2R
  • Remark Old add-on cassettes cannot be installed on new CPU units and serial communication units. Also, the new add-on cassettes cannot be installed on old CPU units and serial communication units. The programs are compatible.

Spec Detail As of March 31, 2023

Item Specifications
Product Number AFP7CPS21
Part Number AFP7CPS21

Control specifications

Item Specifications
Memory capacity:Memory selection pattern1 Program (steps)(Note) : 64,000
Data register (words)(Note) : 131,072
Number of max. program block (PB) : 128
(Note) The factory default setting is pattern 1.
(Note) For data register (DT), data up to 262,144 words can be backed up.
Memory capacity:Memory selection pattern2 Program (steps)(Note) : 32,000
Data register (words)(Note) : 262,144
Number of max. program block (PB) : 64
(Note1) For data register (DT), data up to 262,144 words can be backed up.
Programming method Relay symbol method
Control method Cyclic operation method
Program memory Built-in flash ROM (no backup battery required)
Operation speed Basic instruction: min. 14 ns/step
External input (X) 8,192 points
(Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.
External output (Y) 8,192 points
(Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.
Internal relay (R) 32,768 points
System relay (SR) Indicate operation status of various relays is shown.
Link relay (L) 16,384 points
Timer (T) 4,096 points: Timer capable of counting (units: 10 μs, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295
Counter (C) 1,024 points, Counter capable of counting 1 to 4,294,967,295
Link data register (LD) 16,384 words
System data register (SD) Internal operation status of various registers is shown.
Index register (I0 to IE) 15 long words / With switching function
Master control relay (MCR) Unlimited
Number of labels (LOOP) Max. 65,535 points for each program block (PB)
Differential points Unlimited
Number of step ladders Unlimited
Number of subroutines Max. 65,535 points for each program block (PB)
Number of interrupt program 1 periodical interrupt program
Constant scan Available (0 to 125 ms)
Clock / calendar Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week
(Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month
PLC link function
(Serial communication / MEWNET-W0)		 Max. 16 units, link relays: 1,024 points, link registers: 128 words.
(Data transfer and remote programming are not supported)
(Link area allocation is switchable between the first and the second half)

Communication specifications for COM port

Item Specifications
Interface RS-232C, three-wire system, 1 channel
(Note) SD, RD and SG terminals are isolated from internal circuits.
Transmission distance 15 m 49.213 ft
Transmission speed 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200, 230,400 bits/sec,
Communication method Half-duplex system
Synchronous method Start-stop synchronization system
Transmission format Stop bit: 1 bit / 2 bits
Parity: none / odd / even
Data length: 7 bits / 8 bits
Start code: with STX / without STX
End code: CR / CR + LF / none / ETX
Data transmission order Transmit from bit 0 in character units.
Connection General-purpose communication, Computer link and MODBUS-RTU

Dedicated power supply output port specifications for GT series programmable display

Item Specifications
Terminal:5V For 5 V DC type GT series Programmable Display

Common general specifications

Item Specifications
Ambient temperature 0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance 5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance 147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity 1,000 V [p-p] with pulse width 50 ns and 1 μs (using a noise simulator)
Operating condition Free from corrosive gasses and excessive dust

Individual general specifications

Item Specifications
Rated voltage range 20.4 to 28.8 V DC
Current consumption 150 mA or less
Net weight 180 g approx. (with terminal block and end unit)

Return to top

Accessories (Option) As of March 31, 2023

no_image
Product Number AFP2801
Part Number AFP2801
Product name Scattered wire connector set
no_image
Product Number AFP2802
Part Number AFP2802
Product name Flat cable connector set
FP7 Analog Input and Output units
Product Number AFP7AD4H
Part Number AFP7AD4H
Product FP7 Analog Input and Output units
Details FP7 Analog Input unit (High-speed and high-accuracy type)
Product name FP7 Analog Input and Output units


More



Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)