Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Programmable Controllers / Interface Terminal > Programmable Controllers / Interface Terminal > Motion Controller GM1 > Part Number > AGM1DA4
*Photo may vary from actual product.
Product Number | AGM1DA4 |
Part Number | AGM1DA4 |
Product | Analog output unit |
Product name | Motion Controller GM1 |
As of April 18, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Item | Specifications |
---|---|
Product Number | AGM1DA4 |
Part Number | AGM1DA4 |
Item | Specifications |
---|---|
Rated voltage | 24 V DC |
Operating voltage range | 20.4 to 28.8 V DC |
Allowable momentary power failure time | 10 ms |
Operating ambient temperature | 0 to +55℃ |
Storage ambient temperature | -40~+70 ℃ |
Operating ambient humidity | 10 to 95 % RH (at +25 ℃, no condensation or icing) |
Storage ambient humidity | 10 to 95 % RH (at +25 ℃, no condensation or icing) |
Dielectric strength (Leakage current: 5 mA) | 500 V AC for one minute *Please refer to the unit's specification sheet for details of breakdown voltage and insulation resistance. |
Insulation resistance (Test voltage: 500 V DC) | 100 MΩ or more *Please refer to the unit's specification sheet for details of breakdown voltage and insulation resistance. |
Vibration resistance | Compliant with JIS B 3502, IEC 61131-2 5 to 8.4 Hz, half amplitude 3.5 mm, 8.4 to 150 Hz acceleration 9.8 m/s2 10 sweeps each in X, Y and Z directions (1 octave/min) |
Shock resistance | Compliant with JIS B 3502, IEC 61131-2 147 m/s2, 3 times each in the X, Y, Z directions |
Noise resistance | 1000 V [p-p] with pulse widths of 1 μs and 50 ns (using a noise simulator) (Power supply terminal) |
Atmosphere | Free of corrosive gases No excessive dust |
European EU Standards | EMC: EN 61131-2 RoHS: EN IEC 63000 |
Overvoltage category | Category II |
Pollution degree | 2 |
Weight (main unit) | Approx. 150 g (including the terminal block) |
Consumption current | 160 mA or less |
Item | Specifications |
---|---|
No. of output points | 4ch |
Output range (resolution) | Voltage: -10 to +10 V DC (Resolution: 1/64,000) 0 to +10 V DC (Resolution: 1/32,000) -5 to +5 V DC (Resolution: 1/64,000) 0 to +5 V DC (Resolution: 1/32,000) +1 to +5 V DC (Resolution: 1/25,600) *The full scale (F.S.) on the accuracy is from 0 to +5 V. Current: 0 to +20 mA (Resolution: 1/32,000) +4 to +20 mA (Resolution: 1/25,600) *The full scale (F.S.) on the accuracy is from 0 to +20 mA. |
Conversion speed | 50 μs/4ch |
Exceeding the rated range | Possible to output up to the rated value ± 2% *When a value exceeding the rated value ±2% is set, the output is rounded to a value equivalent to the rated value ±2%. |
Total accuracy | ±0.2 %F.S. or less (at +25 ℃) ±0.4 %F.S. or less (at 0 to +55 ℃) |
Output impedance (voltage output) | 0.5 Ω or less |
Maximum output current (voltage output) | 10 mA |
Output allowable load resistance (current output) | 500 Ω or less |
Insulation method | Between output terminals and internal circuit: Photocoupler and isolated DC/DC converter Between channels: Non-nsulated |
Conversion execution / nonexecution channel settings | Possible to make non-converted channel settings. |
Clipping function | Upper and lower output limits can be set for digital input values. Setting range: -32,640 to +32,640 |
Scale conversion settings | A desired value within the digital input range can be set for the scale conversion setting value. Setting range: -32768 to +32767 |
Offset / Gain settings | A desired value within the digital input range can be set for the offset value. Setting range: -3,000 to +3,000 A desired value within the digital input range can be set for the gain value. Setting range: +9,000 to +11,000 (90 % to 110 %) |
Analog output hold (in STOP mode) | A desired output value while in STOP mode can be set as a digital value. Setting range: -32640 to +32640 |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)