AUTOMATION
CONTROLS

Search
Discontinued
Products



AGM1X64D2 | Motion Controller GM1

  • Print This Page

Motion Controller GM1

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU. 　


Product Number AGM1X64D2
Part Number AGM1X64D2
Product Digital input unit
Product name Motion Controller GM1

As of April 20, 2024
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number AGM1X64D2
Part Number AGM1X64D2

General specifications

Item Specifications
Rated voltage 24 V DC
Operating voltage range 20.4 to 28.8 V DC
Allowable momentary power failure time 10 ms
Operating ambient temperature 0 to +55℃
Storage ambient temperature -40～+70 ℃
Operating ambient humidity 10 to 95 % RH (at +25 ℃, no condensation or icing)
Storage ambient humidity 10 to 95 % RH (at +25 ℃, no condensation or icing)
Dielectric strength (Leakage current: 5 mA) 500 V AC for one minute *Please refer to the unit's specification sheet for details of breakdown voltage and insulation resistance.
Insulation resistance (Test voltage: 500 V DC) 100 MΩ or more *Please refer to the unit's specification sheet for details of breakdown voltage and insulation resistance.
Vibration resistance Compliant with JIS B 3502, IEC 61131-2
5 to 8.4 Hz, half amplitude 3.5 mm,
8.4 to 150 Hz acceleration 9.8 m/s2
10 sweeps each in X, Y and Z directions (1 octave/min)
Shock resistance Compliant with JIS B 3502, IEC 61131-2
147 m/s2, 3 times each in the X, Y, Z directions
Noise resistance 1000 V [p-p] with pulse widths of 1 μs and 50 ns (using a noise simulator) (Power supply terminal)
Atmosphere Free of corrosive gases No excessive dust
European EU Standards EMC: EN 61131-2
RoHS: EN IEC 63000
Overvoltage category Category II
Pollution degree 2
Weight (main unit) Approx. 160 g (including the terminal block)
Consumption current 90 mA or less

Input Specifications

Item Specifications
Insulation method Optical coupler
Rated input voltage 24 V DC
Rated input current Approx. 2.7 mA (at 24 V DC)
Input impedance Approx. 6.8 kΩ
Operating voltage range 20.4 to 26.4 V DC
Min. ON voltage / Min. ON current 19.2 V / 2.5 mA
Max. OFF voltage / Max. OFF current 5 V / 1.5 mA
Response time OFF→ON: 0.2 ms max. (Possible to change by using the input time constant selection function)
ON→OFF: 0.2 ms max. (Possible to change by using the input time constant selection function)
Input points per common 32 points / 1 common
Operating mode indicator 32-point LED display (Lit when ON, SW selection)
External connection method Connector connection (Compliant with the MIL standard, 40P, two pieces used)

Return to top

Accessories (Option)

no_image
Product Number AFP2801
Part Number AFP2801
Product name Scattered wire connector set
no_image
Product Number AFP2802
Part Number AFP2802
Product name Flat cable connector set
no_image
Product Number NEW AFP2808
Part Number AFP2808
Product name Push-In Connector Set


Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)