Business > Industrial Devices > Automation Controls Top > ANR5141

ANR5141 | Micro Laser Displacement Sensor LM10 (Discontinued Products)

CAD data　 Catalogs　 Manuals　 Software
FAQ

*Photo may vary from actual product.

Discontinued
March 31, 2013

Product Number	ANR5141
Part Number	ANR5141
Product	Micro Laser Displacement Sensor
Details	Controller
Product name	Micro Laser Displacement Sensor LM10 (Discontinued Products)

Compact Laser Displacement Sensor HL-G1
-
-
Suggested alternative products may be different under the conditions of use. Contact us

Spec Detail As of March 31, 2013

Item	Specifications
Product Number	ANR5141
Part Number	ANR5141
Comparative output type	Single comparator
Analog output	4 to 20mA/F.S.(250Ohm max.)
Output impedance	-
Zero-point adjustment	Within plus or minus 10% of F.S.
Temperature drift (Sensor and controller set)	Within plus or minus (0.04% of F.S.)/degrees
Response frequency (-3 dB) , Response time (10 to 90 %)	1kHz 0.4ms/100Hz 4ms/10Hz 40ms (Switchable)
Comparative output	NPN open collector 2 Nos.(100mA 30V DC or less, residual voltage 1.5V or less)
Comparative output : Hysteresis	0.15% of F.S. or less
Alarm output	NPN open collector 1 No. (100mA 30V DC or less, residual voltage1.5V or less)
Intensity monitor output	plus or minus 5V
Comparative timing Input	No voltage input (when earthing, no comparative output allowed)
Displacement display	Sensor: Measuring range display LED (RANGE)
Gain selection	AUTO / LOW (switchable)
Mutual interference prevention	Between 2 sets (Note) The value of the linearity characteristics, resolution and response time might get worse.
Operating voltage range	12 to 24 V DC +10 /-15 % including ripple 0.5 V (P-P)
Current consumption (Sensor and controller set)	250mA or less (at 12V DC), 125mA or less (at 24V DC)
Weight (including cable)	Net weight: 180 g approx.
Insulation resistance (Initial)	Between external DC input and sensor metal parts (except for connector metal parts) 20 MOhm or more (at 500 V DC megger)
Voltage withstandability (Initial)	Between external DC input and sensor metal parts (except for connector metal parts) AC 500 V 1 min.
Vibration resistance (Screw installation)	10 to 55 Hz (1 cycle/min.) double amplitude of 0.75 mm 0.030 in, in X, Y and Z directions for two hours each
Shock resistance (Screw installation)	20 G or more, in X, Y and Z directions for three times each
Ambient temperature	0 to +50 degrees +32 to +122 degrees Fahrenheit
Ambient temperature for storage	-20 to +70 degrees -4 to +158 degrees Fahrenheit
Ambient humidity	35 % to 85 % RH (No dew condensation)