Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Pressure Sensors / Flow Sensors > Pressure Sensors / Flow Sensors > Head-separated Dual display Digital Pressure Sensor [For gas & liquid] DPC-L100 / DPH-L100 > Part Number > DPH-L133

DPH-L133 | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] DPC-L100 / DPH-L100

CAD data　 Catalogs　 Manuals　 Software
FAQ

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Dimensions
Accessories (Option)

Product Number	DPH-L133
Part Number	DPH-L133
Product	Head-separated Dual display Digital Pressure Sensor [For gas & liquid]
Details	Sensor head
Product name	Head-separated Dual display Digital Pressure Sensor [For gas & liquid] DPC-L100 / DPH-L100

As of September 27, 2023
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item	Specifications
Product Number	DPH-L133
Part Number	DPH-L133
Applicable regulations	CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Type of pressure	Sealed gauge pressure (Note): The sensor's internal mechanism is sealed based on an air pressure of 1,013 hPa.
Rated pressure range	0 to +3.5 MPa
Pressure withstandability	7 MPa
Applicable fluid	Gases and fluids that do not corrode stainless steel SUS630, SUS304, or SUSXM7
Supply voltage	9 to 36 V DC [9 to 32 V DC when using the attached connector (e-CON)]
Current consumption	20 mA or less
Analog voltage output	Output voltage: 1 to 5 V DC (over rated pressure range) Accuracy: ±1.0 % F.S. (at 23 ±2 ℃ +73.4 ±35 ℉) ±2.0 % F.S. (at -20 to 70 ℃ -4 to +158 ℉) (including linearity, hysteresis and repeatability)
Response time	1 ms or less
Protection	IP67 (IEC)
Ambient temperature	-20 to +70 ℃ -4 to +158 ℉ (No dew condensation or icing allowed), Storage: -30 to +70℃ -22 to +158 ℉
Ambient humidity	35 to 85 % RH, Storage : 35 to 85 % RH
Medium temperature range	-20 to +70 ℃ -4 to +158 ℉
Voltage withstandability	150 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	100 MΩ, or more, with 50 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 2,000 Hz frequency, acceleration 200 m/s², in X direction for four hours, in Y and Z directions for two hours each (Note): The X, Y, and Z directions are defined as follows :
Shock resistance	1,000 m/s² acceleration in X, Y and Z directions three times each
Grounding method	Capacitor earth (Enclosure-supply terminal)
Pressure port	R1/4 male thread (throttle embeded)
Material	Diaphragm : Stainless steel (SUS603), Pressure port : Stainless steel (SUS304), Throttle : Stainless steel (SUSXM7)
Connecting method	Connector
Cable	0.2 mm² 3-core heat resistant cabtyre cable 2 m 3.562 ft long
Cable extension	Extension up to total 10 m 32.808 ft is possible with 0.2 mm², or more, cable.
Weight	Net weight : 100 g approx., Gross weight : 150 g approx.
Accessories	Connector (e-CON) : 1 pc.
Remark	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. The sensor head can be used independently.